Scan execution policies

Version history

Group, subgroup, or project owners can use scan execution policies to require that security scans run on a specified schedule or with the project pipeline. The security scan runs with multiple project pipelines if you define the policy at a group or subgroup level. GitLab injects the required scans into the CI pipeline as new jobs. In the event of a job name collision, GitLab adds a dash and a number to the job name. GitLab increments the number until the name no longer conflicts with existing job names. If you create a policy at the group level, it applies to every child project or subgroup. You cannot edit a group-level policy from a child project or subgroup.

This feature has some overlap with compliance framework pipelines, as we have not unified the user experience for these two features. For details on the similarities and differences between these features, see Enforce scan execution.

note
Policy jobs for scans other than DAST scans are created in the test stage of the pipeline. If you modify the default pipeline stages, to remove the test stage, jobs will run in the scan-policies stage instead. This stage is injected into the CI pipeline at evaluation time if it doesn’t exist. If the build stage exists, it is injected just after the build stage. If the build stage does not exist, it is injected at the beginning of the pipeline. DAST scans always run in the dast stage. If this stage does not exist, then a dast stage is injected at the end of the pipeline.

Scan execution policy editor

note
Only group, subgroup, or project Owners have the permissions to select Security Policy Project.

Once your policy is complete, save it by selecting Configure with a merge request at the bottom of the editor. You are redirected to the merge request on the project’s configured security policy project. If one does not link to your project, a security policy project is automatically created. Existing policies can also be removed from the editor interface by selecting Delete policy at the bottom of the editor.

Most policy changes take effect as soon as the merge request is merged. Any changes that do not go through a merge request and are committed directly to the default branch may require up to 10 minutes before the policy changes take effect.

Scan Execution Policy Editor Rule Mode

Scan execution policies schema

The YAML file with scan execution policies consists of an array of objects matching scan execution policy schema nested under the scan_execution_policy key. You can configure a maximum of 5 policies under the scan_execution_policy key. Any other policies configured after the first 5 are not applied.

When you save a new policy, GitLab validates its contents against this JSON schema. If you’re not familiar with how to read JSON schemas, the following sections and tables provide an alternative.

FieldTypePossible valuesDescription
scan_execution_policy array of scan execution policy List of scan execution policies (maximum 5)

Scan execution policy schema

FieldTypePossible valuesDescription
namestring Name of the policy. Maximum of 255 characters.
description (optional)string Description of the policy.
enabledboolean true, false Flag to enable (true) or disable (false) the policy.
rules array of rules List of rules that the policy applies.
actions array of actions List of actions that the policy enforces.

pipeline rule type

This rule enforces the defined actions whenever the pipeline runs for a selected branch.

FieldTypePossible valuesDescription
typestringpipelineThe rule’s type.
branches array of string * or the branch’s nameThe branch the given policy applies to (supports wildcard).

schedule rule type

This rule enforces the defined actions and schedules a scan on the provided date/time.

FieldTypePossible valuesDescription
typestringscheduleThe rule’s type.
branches array of string * or the branch’s nameThe branch the given policy applies to (supports wildcard). This field is required if the agents field is not set.
cadencestringCRON expression (for example, 0 0 * * *)A whitespace-separated string containing five fields that represents the scheduled time. Minimum of 15 minute intervals when used together with the branches field.
agentsobject The name of the GitLab agents where Operational Container Scanning runs. The object key is the name of the Kubernetes agent configured for your project in GitLab. This field is required if the branches field is not set.

GitLab supports the following types of CRON syntax for the cadence field:

  • A daily cadence of once per hour at a specified hour, for example: 0 18 * * *
  • A weekly cadence of once per week on a specified day and at a specified hour, for example: 0 13 * * 0
note
Other elements of the CRON syntax may work in the cadence field if supported by the cron we are using in our implementation, however, GitLab does not officially test or support them.

When using the schedule rule type in conjunction with the agents field, note the following:

  • The GitLab Agent for Kubernetes checks every 30 seconds to see if there is an applicable policy. When a policy is found, the scans are executed according to the cadence defined.
  • The CRON expression is evaluated using the system-time of the Kubernetes-agent pod.

When using the schedule rule type in conjunction with the branches field, note the following:

  • The cron worker runs on 15 minute intervals and starts any pipelines that were scheduled to run during the previous 15 minutes.
  • Based on your rule, you might expect scheduled pipelines to run with an offset of up to 15 minutes.
  • The CRON expression is evaluated in standard UTC time from GitLab.com. If you have a self-managed GitLab instance and have changed the server time zone, the CRON expression is evaluated with the new time zone.

CRON worker diagram

agent schema

Use this schema to define agents objects in the schedule rule type.

FieldTypePossible valuesDescription
namespaces array of string  The namespace that is scanned. If empty, all namespaces are scanned.

Policy example

- name: Enforce Container Scanning in cluster connected through my-gitlab-agent for default and kube-system namespaces
  enabled: true
  rules:
  - type: schedule
    cadence: '0 10 * * *'
    agents:
      <agent-name>:
        namespaces:
        - 'default'
        - 'kube-system'
  actions:
  - scan: container_scanning

The keys for a schedule rule are:

  • cadence (required): a CRON expression for when the scans are run
  • agents:<agent-name> (required): The name of the agent to use for scanning
  • agents:<agent-name>:namespaces (optional): The Kubernetes namespaces to scan. If omitted, all namespaces are scanned.

scan action type

This action executes the selected scan with additional parameters when conditions for at least one rule in the defined policy are met.

FieldTypePossible valuesDescription
scanstring sast, sast_iac, dast, secret_detection, container_scanning, dependency_scanning The action’s type.
site_profilestringName of the selected DAST site profile.The DAST site profile to execute the DAST scan. This field should only be set if scan type is dast.
scanner_profile string or null Name of the selected DAST scanner profile.The DAST scanner profile to execute the DAST scan. This field should only be set if scan type is dast.
variablesobject A set of CI variables, supplied as an array of key: value pairs, to apply and enforce for the selected scan. The key is the variable name, with its value provided as a string. This parameter supports any variable that the GitLab CI job supports for the specified scan.
tags array of string  A list of runner tags for the policy. The policy jobs are run by runner with the specified tags.

Note the following:

  • You must create the site profile and scanner profile with selected names for each project that is assigned to the selected Security Policy Project. Otherwise, the policy is not applied and a job with an error message is created instead.
  • Once you associate the site profile and scanner profile by name in the policy, it is not possible to modify or delete them. If you want to modify them, you must first disable the policy by setting the active flag to false.
  • When configuring policies with a scheduled DAST scan, the author of the commit in the security policy project’s repository must have access to the scanner and site profiles. Otherwise, the scan is not scheduled successfully.
  • For a secret detection scan, only rules with the default ruleset are supported. Custom rulesets are not supported.
  • A secret detection scan runs in normal mode when executed as part of a pipeline, and in historic mode when executed as part of a scheduled scan.
  • A container scanning scan that is configured for the pipeline rule type ignores the agent defined in the agents object. The agents object is only considered for schedule rule types. An agent with a name provided in the agents object must be created and configured for the project.

Example security policies project

You can use this example in a .gitlab/security-policies/policy.yml file stored in a security policy project:

---
scan_execution_policy:
- name: Enforce DAST in every release pipeline
  description: This policy enforces pipeline configuration to have a job with DAST scan for release branches
  enabled: true
  rules:
  - type: pipeline
    branches:
    - release/*
  actions:
  - scan: dast
    scanner_profile: Scanner Profile A
    site_profile: Site Profile B
- name: Enforce DAST and secret detection scans every 10 minutes
  description: This policy enforces DAST and secret detection scans to run every 10 minutes
  enabled: true
  rules:
  - type: schedule
    branches:
    - main
    cadence: "*/10 * * * *"
  actions:
  - scan: dast
    scanner_profile: Scanner Profile C
    site_profile: Site Profile D
  - scan: secret_detection
- name: Enforce Secret Detection and Container Scanning in every default branch pipeline
  description: This policy enforces pipeline configuration to have a job with Secret Detection and Container Scanning scans for the default branch
  enabled: true
  rules:
  - type: pipeline
    branches:
    - main
  actions:
  - scan: secret_detection
  - scan: sast
    variables:
      SAST_EXCLUDED_ANALYZERS: brakeman
  - scan: container_scanning

In this example:

  • For every pipeline executed on branches that match the release/* wildcard (for example, branch release/v1.2.1), DAST scans run with Scanner Profile A and Site Profile B.
  • DAST and secret detection scans run every 10 minutes. The DAST scan runs with Scanner Profile C and Site Profile D.
  • Secret detection, container scanning, and SAST scans run for every pipeline executed on the main branch. The SAST scan runs with the SAST_EXCLUDED_ANALYZER variable set to "brakeman".

Example for scan execution policy editor

You can use this example in the YAML mode of the scan execution policy editor. It corresponds to a single object from the previous example.

name: Enforce Secret Detection and Container Scanning in every default branch pipeline
description: This policy enforces pipeline configuration to have a job with Secret Detection and Container Scanning scans for the default branch
enabled: true
rules:
  - type: pipeline
    branches:
      - main
actions:
  - scan: secret_detection
  - scan: container_scanning

Avoiding duplicate scans

Scan execution policies can cause the same type of scanner to run more than once if developers include scan jobs in the project’s .gitlab-ci.yml file. This behavior is intentional as scanners can run more than once with different variables and settings. For example, a developer may want to try running a SAST scan with different variables than the one enforced by the security and compliance team. In this case, two SAST jobs run in the pipeline, one with the developer’s variables and one with the security and compliance team’s variables.

If you want to avoid running duplicate scans, you can either remove the scans from the project’s .gitlab-ci.yml file or disable your local jobs by setting SAST_DISABLED: "true". Disabling jobs this way does not prevent the security jobs defined by scan execution policies from running.