Configure SSL for a Linux package installation

The Linux package supports several common use cases for SSL configuration.

By default, HTTPS is not enabled. To enable HTTPS, you can:

  • Use Let’s Encrypt for free, automated HTTPS.
  • Manually configure HTTPS with your own certificates.
note
If you use a proxy, load balancer or some other external device to terminate SSL for the GitLab host name, see External, proxy, and load balancer SSL termination.

The following table shows which method each GitLab service supports.

ServiceManual SSLLet’s Encrypt integration
GitLab instance domainYesYes
Container RegistryYesYes
MattermostYesYes
GitLab PagesYesNo

Enable the Let’s Encrypt integration

Let’s Encrypt is enabled by default if external_url is set with the HTTPS protocol and no other certificates are configured.

Prerequisites:

  • Ports 80 and 443 must be accessible to the public Let’s Encrypt servers that run the validation checks. The validation does not work with non-standard ports. If the environment is private or air-gapped, certbot (the tool used by Let’s Encrypt) provides a manual method to install a Let’s Encrypt certificate.

To enable Let’s Encrypt:

  1. Edit /etc/gitlab/gitlab.rb and add or change the following entries:

    ## GitLab instance
    external_url "https://gitlab.example.com"         # Must use https protocol
    letsencrypt['contact_emails'] = ['foo@email.com'] # Optional
    
    ## Container Registry (optional), must use https protocol
    registry_external_url "https://registry.example.com"
    #registry_nginx['ssl_certificate'] = "path/to/cert"      # Must be absent or commented out
    
    ## Mattermost (optional), must use https protocol
    mattermost_external_url "https://mattermost.example.com"
    
    • Certificates expire every 90 days. Email addresses you specify for contact_emails receive an alert when the expiration date approaches.
    • The GitLab instance is the primary domain name on the certificate. Additional services such as the Container Registry are added as alternate domain names to the same certificate. In the example above, the primary domain is gitlab.example.com and the Container Registry domain is registry.example.com. You don’t need to set up wildcard certificates.
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Renew the certificates automatically

Default installations schedule renewals after midnight on every 4th day of the month. The minute is determined by the value in external_url to help distribute the load on the upstream Let’s Encrypt servers.

To explicitly set the renewal times:

  1. Edit /etc/gitlab/gitlab.rb:

    # Renew every 7th day of the month at 12:30
    letsencrypt['auto_renew_hour'] = "12"
    letsencrypt['auto_renew_minute'] = "30"
    letsencrypt['auto_renew_day_of_month'] = "*/7"
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    
note
The certificate is renewed only if it expires in 30 days. For example, if you set it to renew on the 1st of every month at 00:00 and the certificate expires on the 31st, then the certificate will expire before it’s renewed.

To disable the automatic renewal:

  1. Edit /etc/gitlab/gitlab.rb:

    letsencrypt['auto_renew'] = false
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Renew the certificates manually

Renew the Let’s Encrypt certificates manually using either one of the following commands:

sudo gitlab-ctl reconfigure
sudo gitlab-ctl renew-le-certs

The previous commands only generate a renewal if the certificate is close to expiration. If encountering an error during renewal, consider the upstream rate limits.

Use an ACME server other than Let’s Encrypt

You can use an ACME server other than Let’s Encrypt, and configure GitLab to use that to fetch a certificate. Some services that provide their own ACME server are:

To configure GitLab to use a custom ACME server:

  1. Edit /etc/gitlab/gitlab.rb and set the ACME endpoints:

    external_url 'https://example.com'
    letsencrypt['acme_staging_endpoint'] = 'https://ca.internal/acme/acme/directory'
    letsencrypt['acme_production_endpoint'] = 'https://ca.internal/acme/acme/directory'
    

    If the custom ACME server provides it, use a staging endpoint as well. Checking the staging endpoint first ensures that the ACME configuration is correct before submitting the request to ACME production. Do this to avoid ACME rate-limits while working on your configuration.

    The default values are:

    https://acme-staging-v02.api.letsencrypt.org/directory
    https://acme-v02.api.letsencrypt.org/directory
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Add alternative domains to the certificate

You can add alternative domains (or subject alternative names) to the Let’s Encrypt certificate. This can be helpful if you would like to use the bundled NGINX as a reverse proxy for other backend applications.

The DNS records for the alternative domains must point to the GitLab instance.

To add alternative domains to your Let’s Encrypt certificate:

  1. Edit /etc/gitlab/gitlab.rb and add the alternative domains:

     # Separate multiple domains with commas
     letsencrypt['alt_names'] = ['another-application.example.com']
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

The resulting Let’s Encrypt certificates generated for the main GitLab application will include the alternative domains specified. The generated files are located at:

  • /etc/gitlab/ssl/gitlab.example.com.key for the key.
  • /etc/gitlab/ssl/gitlab.example.com.crt for the certificate.

Configure HTTPS manually

caution
The NGINX configuration tells browsers and clients to only communicate with your GitLab instance over a secure connection for the next 365 days using HSTS. See Configure the HTTP Strict Transport Security for more configuration options. If enabling HTTPS, you must provide a secure connection to your instance for at least the next 24 months.

To enable HTTPS:

  1. Edit /etc/gitlab/gitlab.rb:
    1. Set the external_url to your domain. Note the https in the URL:

      external_url "https://gitlab.example.com"
      
    2. Disable the Let’s Encrypt integration:

      letsencrypt['enable'] = false
      

      GitLab attempts to renew any Let’s Encrypt certificate with every reconfigure. If you plan to use your own manually created certificate you must disable the Let’s Encrypt integration, otherwise the certificate could be overwritten due to the automatic renewal.

  2. Create the /etc/gitlab/ssl directory and copy your key and certificate there:

    sudo mkdir -p /etc/gitlab/ssl
    sudo chmod 755 /etc/gitlab/ssl
    sudo cp gitlab.example.com.key gitlab.example.com.crt /etc/gitlab/ssl/
    

    In the example, the hostname is gitlab.example.com, so the Linux package installation looks for private key and public certificate files called /etc/gitlab/ssl/gitlab.example.com.key and /etc/gitlab/ssl/gitlab.example.com.crt, respectively. If you want, you can use a different location and certificates names.

    You must use the full certificate chain, in the correct order, to prevent SSL errors when clients connect: first the server certificate, then all intermediate certificates, and finally the root CA.

  3. Optional. If the certificate.key file is password protected, NGINX doesn’t ask for the password when you reconfigure GitLab. In that case, the Linux package installation fails silently with no error messages.

    To specify the password for the key file, store the password in a text file (for example, /etc/gitlab/ssl/key_file_password.txt) and add the following to /etc/gitlab/gitlab.rb:

    nginx['ssl_password_file'] = '/etc/gitlab/ssl/key_file_password.txt'
    
  4. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    
  5. Optional. If you are using a firewall, you may have to open port 443 to allow inbound HTTPS traffic:

    # UFW example (Debian, Ubuntu)
    sudo ufw allow https
    
    # lokkit example (RedHat, CentOS 6)
    sudo lokkit -s https
    
    # firewall-cmd (RedHat, Centos 7)
    sudo firewall-cmd --permanent --add-service=https
    sudo systemctl reload firewalld
    

If you are updating existing certificates, follow a different process.

Redirect HTTP requests to HTTPS

By default, when you specify an external_url starting with https, NGINX no longer listens for unencrypted HTTP traffic on port 80. To redirect all HTTP traffic to HTTPS:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['redirect_http_to_https'] = true
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    
note
This behavior is enabled by default when using the Let’s Encrypt integration.

Change the default HTTPS port

If you need to use an HTTPS port other than the default (443), specify it as part of the external_url:

  1. Edit /etc/gitlab/gitlab.rb:

    external_url "https://gitlab.example.com:2443"
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Change the default SSL certificate location

If your hostname is gitlab.example.com, a Linux package installation looks for a private key called /etc/gitlab/ssl/gitlab.example.com.key and a public certificate called /etc/gitlab/ssl/gitlab.example.com.crt by default.

To set a different location of the SSL certificates:

  1. Create a directory, give it the appropriate permissions, and place the .crt and .key files in the directory:

    sudo mkdir -p /mnt/gitlab/ssl
    sudo chmod 755 /mnt/gitlab/ssl
    sudo cp gitlab.key gitlab.crt /mnt/gitlab/ssl/
    

    You must use the full certificate chain, in the correct order, to prevent SSL errors when clients connect: first the server certificate, then all intermediate certificates, and finally the root CA.

  2. Edit /etc/gitlab/gitlab.rb:

    nginx['ssl_certificate'] = "/mnt/gitlab/ssl/gitlab.crt"
    nginx['ssl_certificate_key'] = "/mnt/gitlab/ssl/gitlab.key"
    
  3. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Update the SSL certificates

If the content of your SSL certificates has been updated, but no configuration changes have been made to /etc/gitlab/gitlab.rb, then reconfiguring GitLab doesn’t affect NGINX. Instead, you must cause NGINX to reload the existing configuration and new certificates gracefully:

sudo gitlab-ctl hup nginx 
sudo gitlab-ctl hup registry

Configure a reverse proxy or load balancer SSL termination

By default, Linux package installations auto-detect whether to use SSL if external_url contains https:// and configures NGINX for SSL termination. However, if you configure GitLab to run behind a reverse proxy or an external load balancer, some environments may want to terminate SSL outside the GitLab application.

To prevent the bundled NGINX from handling SSL termination:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['listen_port'] = 80
    nginx['listen_https'] = false
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

The external load balancer may need access to a GitLab endpoint that returns a 200 status code (for installations requiring login, the root page returns a 302 redirect to the login page). In that case, it’s recommended to leverage a health check endpoint.

Other bundled components, like the Container Registry, GitLab Pages, or Mattermost, use a similar strategy for proxied SSL. Set the particular component’s *_external_url with https:// and prefix the nginx[...] configuration with the component name. For example, the GitLab Container Registry configuration is prefixed with registry_:

  1. Edit /etc/gitlab/gitlab.rb:

    registry_external_url 'https://registry.example.com'
    
    registry_nginx['listen_port'] = 80
    registry_nginx['listen_https'] = false
    

    The same format can be used for Pages (pages_ prefix) and Mattermost (mattermost_ prefix).

  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    
  3. Optional. You may need to configure your reverse proxy or load balancer to forward certain headers (for example Host, X-Forwarded-Ssl, X-Forwarded-For, X-Forwarded-Port) to GitLab (and Mattermost if you use one). If you forget this step, you may see improper redirections or errors, like “422 Unprocessable Entity” or “Can’t verify CSRF token authenticity”.

Some cloud provider services, such as AWS Certificate Manager (ACM), do not allow the download of certificates. This prevents them from being used to terminate on the GitLab instance. If SSL is desired between such a cloud service and GitLab, another certificate must be used on the GitLab instance.

Use custom SSL ciphers

By default, GitLab is using SSL ciphers that are a combination of testing on https://gitlab.com and various best practices contributed by the GitLab community.

To change the SSL ciphers:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['ssl_ciphers'] = "CIPHER:CIPHER1"
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

To enable the ssl_dhparam directive:

  1. Generate dhparams.pem:

    openssl dhparam -out /etc/gitlab/ssl/dhparams.pem 2048
    
  2. Edit /etc/gitlab/gitlab.rb:

    nginx['ssl_dhparam'] = "/etc/gitlab/ssl/dhparams.pem"
    
  3. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Configure the HTTP/2 protocol

By default, when you specify that your GitLab instance is reachable through HTTPS, the HTTP/2 protocol is also enabled.

The Linux package sets the required SSL ciphers that are compatible with the HTTP/2 protocol.

If you specify your own custom SSL ciphers and a cipher is in the HTTP/2 cipher blacklist, when you try to reach your GitLab instance you are presented with the INADEQUATE_SECURITY error in your browser. In that case, consider removing the offending ciphers from the cipher list. Changing ciphers is only necessary if you have a very specific custom setup.

For more information on why you would want to have the HTTP/2 protocol enabled, check out the NGINX HTTP/2 whitepaper.

If changing the ciphers is not an option, you can disable the HTTP/2 support:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['http2_enabled'] = false
    
  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    
note
The HTTP/2 setting only works for the main GitLab application and not for the other services, like GitLab Pages, Container Registry, and Mattermost.

Enable 2-way SSL client authentication

To require web clients to authenticate with a trusted certificate, you can enable 2-way SSL:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['ssl_verify_client'] = "on"
    nginx['ssl_client_certificate'] = "/etc/pki/tls/certs/root-certs.pem"
    
  2. Optional. You can configure how deeply in the certificate chain NGINX should verify before deciding that the clients don’t have a valid certificate (default is 1). Edit /etc/gitlab/gitlab.rb:

    nginx['ssl_verify_depth'] = "2"
    
  3. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Configure the HTTP Strict Transport Security (HSTS)

note
The HSTS settings only work for the main GitLab application and not for the other services, like GitLab Pages, Container Registry, and Mattermost.

HTTP Strict Transport Security (HSTS) is enabled by default and it informs browsers that they should only contact the website using HTTPS. When a browser visits a GitLab instance even once, it remembers to no longer attempt insecure connections, even when the user is explicitly entering a plain HTTP URL (http://). Plain HTTP URLs are automatically redirected by the browser to the https:// variant.

By default, max_age is set for two years, this is how long a browser will remember to only connect through HTTPS.

To change the max age value:

  1. Edit /etc/gitlab/gitlab.rb:

    nginx['hsts_max_age'] = 63072000
    nginx['hsts_include_subdomains'] = false
    

    Setting max_age to 0 disables HSTS.

  2. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

For more information on HSTS and NGINX, see https://www.nginx.com/blog/http-strict-transport-security-hsts-and-nginx/.

Install custom public certificates

Some environments connect to external resources for various tasks and GitLab allows these connections to use HTTPS, and supports connections with self-signed certificates. GitLab has its own ca-cert bundle that you can add certs to by placing the individual custom certs in the /etc/gitlab/trusted-certs directory. They then get added to the bundle. They are added using openssl’s c_rehash method, which only works on a single certificate.

GitLab ships with the official CAcert.org collection of trusted root certification authorities which are used to verify certificate authenticity.

note
For installations that use self-signed certificates, the Linux package provides a way to manage these certificates. For more technical details how this works, see the details at the bottom of this page.

To install custom public certificates:

  1. Generate the PEM or DER encoded public certificate from your private key certificate.
  2. Copy only the public certificate file into the /etc/gitlab/trusted-certs directory. If you have a multi-node installation, make sure to copy the certificate in all nodes.
    • When configuring GitLab to use a custom public certificate, by default, GitLab expects to find a certificate named after your GitLab domain name with a .crt extension. For example, if your server address is https://gitlab.example.com, the certificate should be named gitlab.example.com.crt.
    • If GitLab needs to connect to an external resource that uses a custom public certificate, store the certificate in the /etc/gitlab/trusted-certs directory with a .crt extension. You don’t have to name the file based on the domain name of the related external resource, though it helps to use a consistent naming scheme.

    To specify a different path and file name, you can change the default SSL certificate location.

  3. Reconfigure GitLab:

    sudo gitlab-ctl reconfigure
    

Using a custom certificate chain

Because of a known issue, if using a custom certificate chain, the server, intermediate, and root certificates must be put into separate files in the /etc/gitlab/trusted-certs directory.

This applies in both cases where GitLab itself, or external resources GitLab must connect to, are using a custom certificate chain.

For example, for GitLab itself you can use:

  • /etc/gitlab/trusted-certs/example.gitlab.com.crt
  • /etc/gitlab/trusted-certs/example.gitlab.com_intermediate.crt
  • /etc/gitlab/trusted-certs/example.gitlab.com_root.crt

For external resources GitLab must connect to, you can use:

  • /etc/gitlab/trusted-certs/external-service.gitlab.com.crt
  • /etc/gitlab/trusted-certs/external-service.gitlab.com_intermediate.crt
  • /etc/gitlab/trusted-certs/external-service.gitlab.com_root.crt

Details on how GitLab and SSL work

The Linux package includes its own library of OpenSSL and links all compiled programs (e.g. Ruby, PostgreSQL, etc.) against this library. This library is compiled to look for certificates in /opt/gitlab/embedded/ssl/certs.

The Linux package manages custom certificates by symlinking any certificate that gets added to /etc/gitlab/trusted-certs/ to /opt/gitlab/embedded/ssl/certs using the c_rehash tool. For example, let’s suppose we add customcacert.pem to /etc/gitlab/trusted-certs/:

$ sudo ls -al /opt/gitlab/embedded/ssl/certs

total 272
drwxr-xr-x 2 root root   4096 Jul 12 04:19 .
drwxr-xr-x 4 root root   4096 Jul  6 04:00 ..
lrwxrwxrwx 1 root root     42 Jul 12 04:19 7f279c95.0 -> /etc/gitlab/trusted-certs/customcacert.pem
-rw-r--r-- 1 root root 263781 Jul  5 17:52 cacert.pem
-rw-r--r-- 1 root root    147 Feb  6 20:48 README

Here we see the fingerprint of the certificate is 7f279c95, which links to the custom certificate.

What happens when we make an HTTPS request? Let’s take a simple Ruby program:

#!/opt/gitlab/embedded/bin/ruby
require 'openssl'
require 'net/http'

Net::HTTP.get(URI('https://www.google.com'))

This is what happens behind the scenes:

  1. The “require openssl” line causes the interpreter to load /opt/gitlab/embedded/lib/ruby/2.3.0/x86_64-linux/openssl.so.
  2. The Net::HTTP call then attempts to read the default certificate bundle in /opt/gitlab/embedded/ssl/certs/cacert.pem.
  3. SSL negotiation occurs.
  4. The server sends its SSL certificates.
  5. If the certificates that are sent are covered by the bundle, SSL finishes successfully.
  6. Otherwise, OpenSSL may validate other certificates by searching for files that match their fingerprints inside the predefined certificate directory. For example, if a certificate has the fingerprint 7f279c95, OpenSSL will attempt to read /opt/gitlab/embedded/ssl/certs/7f279c95.0.

Note that the OpenSSL library supports the definition of SSL_CERT_FILE and SSL_CERT_DIR environment variables. The former defines the default certificate bundle to load, while the latter defines a directory in which to search for more certificates. These variables should not be necessary if you have added certificates to the trusted-certs directory. However, if for some reason you need to set them, they can be defined as environment variables. For example:

gitlab_rails['env'] = {"SSL_CERT_FILE" => "/usr/lib/ssl/private/customcacert.pem"}

Troubleshooting

See our guide for troubleshooting SSL.