Integrate LDAP with GitLab
Offering: Self-managed
GitLab integrates with LDAP - Lightweight Directory Access Protocol to support user authentication.
This integration works with most LDAP-compliant directory servers, including:
- Microsoft Active Directory.
- Apple Open Directory.
- Open LDAP.
- 389 Server.
Users added through LDAP:
- Usually use a licensed seat.
- Can authenticate with Git using either their GitLab username or their email and LDAP password, even if password authentication for Git is disabled.
The LDAP distinguished name (DN) is associated with existing GitLab users when:
- The existing user signs in to GitLab with LDAP for the first time.
- The LDAP email address is the primary email address of an existing GitLab user. If the LDAP email attribute isn’t found in the GitLab user database, a new user is created.
If an existing GitLab user wants to enable LDAP sign-in for themselves, they should:
- Check that their GitLab email address matches their LDAP email address.
- Sign in to GitLab by using their LDAP credentials.
Security
GitLab verifies if a user is still active in LDAP.
Users are considered inactive in LDAP when they:
- Are removed from the directory completely.
- Reside outside the configured
base
DN oruser_filter
search. - Are marked as disabled or deactivated in Active Directory through the user account control attribute. This means attribute
userAccountControl:1.2.840.113556.1.4.803
has bit 2 set.
GitLab checks LDAP users’ status:
- When signing in using any authentication provider. In GitLab 14.4 and earlier, status was checked only when signing in using LDAP directly.
- Once per hour for active web sessions or Git requests using tokens or SSH keys.
- When performing Git over HTTP requests using LDAP username and password.
- Once per day during User Sync.
If the user is no longer active in LDAP, they are:
- Signed out.
- Placed in an
ldap_blocked
status. - Unable to sign in using any authentication provider until they are reactivated in LDAP.
Security risks
You should only use LDAP integration if your LDAP users cannot:
- Change their
mail
,email
oruserPrincipalName
attributes on the LDAP server. These users can potentially take over any account on your GitLab server. - Share email addresses. LDAP users with the same email address can share the same GitLab account.
Configure LDAP
Prerequisites:
- You must have an email address to use LDAP, regardless of whether or not you use that email address to sign in.
To configure LDAP, you edit the settings in a configuration file:
- Your configuration file must contain the following basic configuration settings:
label
host
port
uid
base
encryption
- You can include the following optional settings in your configuration file:
- You can also configure LDAP to:
The file you edit differs depending on your GitLab setup:
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'LDAP', 'host' => 'ldap.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'bind_dn' => 'CN=Gitlab,OU=Users,DC=domain,DC=com', 'password' => '<bind_user_password>', 'encryption' => 'simple_tls', 'verify_certificates' => true, 'timeout' => 10, 'active_directory' => false, 'user_filter' => '(employeeType=developer)', 'base' => 'dc=example,dc=com', 'lowercase_usernames' => 'false', 'retry_empty_result_with_codes' => [80], 'allow_username_or_email_login' => false, 'block_auto_created_users' => false } }
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: servers: main: label: 'LDAP' host: 'ldap.mydomain.com' port: 636 uid: 'sAMAccountName' bind_dn: 'CN=Gitlab,OU=Users,DC=domain,DC=com' password: '<bind_user_password>' encryption: 'simple_tls' verify_certificates: true timeout: 10 active_directory: false user_filter: '(employeeType=developer)' base: 'dc=example,dc=com' lowercase_usernames: false retry_empty_result_with_codes: [80] allow_username_or_email_login: false block_auto_created_users: false
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
For more information, see how to configure LDAP for a GitLab instance that was installed by using the Helm chart.
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'LDAP', 'host' => 'ldap.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'bind_dn' => 'CN=Gitlab,OU=Users,DC=domain,DC=com', 'password' => '<bind_user_password>', 'encryption' => 'simple_tls', 'verify_certificates' => true, 'timeout' => 10, 'active_directory' => false, 'user_filter' => '(employeeType=developer)', 'base' => 'dc=example,dc=com', 'lowercase_usernames' => 'false', 'retry_empty_result_with_codes' => [80], 'allow_username_or_email_login' => false, 'block_auto_created_users' => false } }
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
/home/git/gitlab/config/gitlab.yml
:production: &base ldap: enabled: true servers: main: label: 'LDAP' host: 'ldap.mydomain.com' port: 636 uid: 'sAMAccountName' bind_dn: 'CN=Gitlab,OU=Users,DC=domain,DC=com' password: '<bind_user_password>' encryption: 'simple_tls' verify_certificates: true timeout: 10 active_directory: false user_filter: '(employeeType=developer)' base: 'dc=example,dc=com' lowercase_usernames: false retry_empty_result_with_codes: [80] allow_username_or_email_login: false block_auto_created_users: false
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
For more information about the various LDAP options, see the ldap
setting in
gitlab.yml.example
.
After configuring LDAP, to test the configuration, use the LDAP check Rake task.
Basic configuration settings
- The
hosts
configuration setting was introduced in GitLab 14.7.
The following basic settings are available:
Setting | Required | Type | Description |
---|---|---|---|
label
| Yes | String | A human-friendly name for your LDAP server. It is displayed on your sign-in page. Example: 'Paris' or 'Acme, Ltd.'
|
host
| Yes | String | IP address or domain name of your LDAP server. Ignored when hosts is defined. Example: 'ldap.mydomain.com'
|
port
| Yes | Integer | The port to connect with on your LDAP server. Ignored when hosts is defined. Example: 389 or 636 (for SSL)
|
uid
| Yes | String | The LDAP attribute that maps to the username that users use to sign in. Should be the attribute, not the value that maps to the uid . Does not affect the GitLab username (see attributes section). Example: 'sAMAccountName' or 'uid' or 'userPrincipalName'
|
base
| Yes | String | Base where we can search for users. Example: 'ou=people,dc=gitlab,dc=example' or 'DC=mydomain,DC=com'
|
encryption
| Yes | String | Encryption method (the method key is deprecated in favor of encryption ). It can have one of three values: 'start_tls' , 'simple_tls' , or 'plain' . simple_tls corresponds to ‘Simple TLS’ in the LDAP library. start_tls corresponds to StartTLS, not to be confused with regular TLS. If you specify simple_tls , usually it’s on port 636, while start_tls (StartTLS) would be on port 389. plain also operates on port 389.
|
hosts
| No | Array of strings and integers | An array of host and port pairs to open connections. Each configured server should have an identical data set. This is not meant to configure multiple distinct LDAP servers, but to configure failover. Hosts are tried in the order they are configured. Example: [['ldap1.mydomain.com', 636], ['ldap2.mydomain.com', 636]]
|
bind_dn
| No | String | The full DN of the user you bind with. Example: 'america\momo' or 'CN=Gitlab,OU=Users,DC=domain,DC=com'
|
password
| No | String | The password of the bind user. |
verify_certificates
| No | Boolean | Defaults to true . Enables SSL certificate verification if encryption method is start_tls or simple_tls . If set to false , no validation of the LDAP server’s SSL certificate is performed.
|
timeout
| No | Integer | Defaults to 10 . Set a timeout, in seconds, for LDAP queries. This helps avoid blocking a request if the LDAP server becomes unresponsive. A value of 0 means there is no timeout.
|
active_directory
| No | Boolean | This setting specifies if LDAP server is Active Directory LDAP server. For non-AD servers it skips the AD specific queries. If your LDAP server is not AD, set this to false. |
allow_username_or_email_login
| No | Boolean | Defaults to false . If enabled, GitLab ignores everything after the first @ in the LDAP username submitted by the user on sign-in. If you are using uid: 'userPrincipalName' on ActiveDirectory you must disable this setting, because the userPrincipalName contains an @ .
|
block_auto_created_users
| No | Boolean | Defaults to false . To maintain tight control over the number of billable users on your GitLab installation, enable this setting to keep new users blocked until they have been cleared by an administrator .
|
user_filter
| No | String | Filter LDAP users. Follows the format of RFC 4515. GitLab does not support omniauth-ldap ’s custom filter syntax. Examples of the user_filter field syntax:- '(employeeType=developer)' - '(&(objectclass=user)(|(samaccountname=momo)(samaccountname=toto)))'
|
lowercase_usernames
| No | Boolean | If enabled, GitLab converts the name to lower case. |
retry_empty_result_with_codes
| No | Array | An array of LDAP query response code that attempt to retry the operation if the result/content is empty. For Google Secure LDAP, set this value to [80] .
|
SSL configuration settings
You can configure SSL configuration settings under tls_options
name/value
pairs. The following settings are all optional:
Setting | Description | Examples |
---|---|---|
ca_file
| Specifies the path to a file containing a PEM-format CA certificate, for example, if you need an internal CA. | '/etc/ca.pem'
|
ssl_version
| Specifies the SSL version for OpenSSL to use, if the OpenSSL default is not appropriate. | 'TLSv1_1'
|
ciphers
| Specific SSL ciphers to use in communication with LDAP servers. | 'ALL:!EXPORT:!LOW:!aNULL:!eNULL:!SSLv2'
|
cert
| Client certificate. | '-----BEGIN CERTIFICATE----- <REDACTED> -----END CERTIFICATE -----'
|
key
| Client private key. | '-----BEGIN PRIVATE KEY----- <REDACTED> -----END PRIVATE KEY -----'
|
The examples below illustrate how to set ca_file
and ssl_version
in tls_options
:
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'LDAP', 'host' => 'ldap.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com' 'tls_options' => { 'ca_file' => '/path/to/ca_file.pem', 'ssl_version' => 'TLSv1_2' } } }
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: servers: main: label: 'LDAP' host: 'ldap.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls' tls_options: ca_file: '/path/to/ca_file.pem' ssl_version: 'TLSv1_2'
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
For more information, see how to configure LDAP for a GitLab instance that was installed by using the Helm chart.
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'LDAP', 'host' => 'ldap.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', 'tls_options' => { 'ca_file' => '/path/to/ca_file.pem', 'ssl_version' => 'TLSv1_2' } } }
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
/home/git/gitlab/config/gitlab.yml
:production: &base ldap: enabled: true servers: main: label: 'LDAP' host: 'ldap.mydomain.com' port: 636 uid: 'sAMAccountName' encryption: 'simple_tls' base: 'dc=example,dc=com' tls_options: ca_file: '/path/to/ca_file.pem' ssl_version: 'TLSv1_2'
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
Attribute configuration settings
GitLab uses these LDAP attributes to create an account for the LDAP user. The specified attribute can be either:
- The attribute name as a string. For example,
'mail'
. - An array of attribute names to try in order. For example,
['mail', 'email']
.
The user’s LDAP sign in is the LDAP attribute specified as uid
.
All of the following LDAP attributes are optional. If you define these attributes,
you must do so in an attributes
hash.
Setting | Description | Examples |
---|---|---|
username
| Used in paths for the user’s own projects (for example, gitlab.example.com/username/project ) and when mentioning them in issues, merge request and comments (for example, @username ). If the attribute specified for username contains an email address, the GitLab username is part of the email address before the @ .
| ['uid', 'userid', 'sAMAccountName']
|
email
| LDAP attribute for user email. | ['mail', 'email', 'userPrincipalName']
|
name
| LDAP attribute for user display name. If name is blank, the full name is taken from the first_name and last_name .
| Attributes 'cn' , or 'displayName' commonly carry full names. Alternatively, you can force the use of first_name and last_name by specifying an absent attribute such as 'somethingNonExistent' .
|
first_name
| LDAP attribute for user first name. Used when the attribute configured for name does not exist.
| 'givenName'
|
last_name
| LDAP attribute for user last name. Used when the attribute configured for name does not exist.
| 'sn'
|
LDAP sync configuration settings
Offering: Self-managed
These LDAP sync configuration settings are optional, excluding group_base
which
required when external_groups
is configured:
Setting | Description | Examples |
---|---|---|
group_base
| Base used to search for groups. All valid groups have this base as part of their DN. | 'ou=groups,dc=gitlab,dc=example'
|
admin_group
| The CN of a group containing GitLab administrators. Not cn=administrators or the full DN.
| 'administrators'
|
external_groups
| An array of CNs of groups containing users that should be considered external. Not cn=interns or the full DN.
| ['interns', 'contractors']
|
sync_ssh_keys
| The LDAP attribute containing a user’s public SSH key. |
'sshPublicKey' or false if not set
|
Use multiple LDAP servers
Offering: Self-managed
If you have users on multiple LDAP servers, you can configure GitLab to use them. To add additional LDAP servers:
- Duplicate the
main
LDAP configuration. - Edit each duplicate configuration with the details of the additional servers.
- For each additional server, choose a different provider ID, like
main
,secondary
, ortertiary
. Use lowercase alphanumeric characters. GitLab uses the provider ID to associate each user with a specific LDAP server. - For each entry, use a unique
label
value. These values are used for the tab names on the sign-in page.
- For each additional server, choose a different provider ID, like
The following example shows how to configure three LDAP servers with minimal configuration:
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'GitLab AD', 'host' => 'ad.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', }, 'secondary' => { 'label' => 'GitLab Secondary AD', 'host' => 'ad-secondary.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', }, 'tertiary' => { 'label' => 'GitLab Tertiary AD', 'host' => 'ad-tertiary.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', } }
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: servers: main: label: 'GitLab AD' host: 'ad.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls' secondary: label: 'GitLab Secondary AD' host: 'ad-secondary.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls' tertiary: label: 'GitLab Tertiary AD' host: 'ad-tertiary.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls'
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_enabled'] = true gitlab_rails['ldap_servers'] = { 'main' => { 'label' => 'GitLab AD', 'host' => 'ad.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', }, 'secondary' => { 'label' => 'GitLab Secondary AD', 'host' => 'ad-secondary.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', }, 'tertiary' => { 'label' => 'GitLab Tertiary AD', 'host' => 'ad-tertiary.mydomain.com', 'port' => 636, 'uid' => 'sAMAccountName', 'encryption' => 'simple_tls', 'base' => 'dc=example,dc=com', } }
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
/home/git/gitlab/config/gitlab.yml
:production: &base ldap: enabled: true servers: main: label: 'GitLab AD' host: 'ad.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls' secondary: label: 'GitLab Secondary AD' host: 'ad-secondary.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls' tertiary: label: 'GitLab Tertiary AD' host: 'ad-tertiary.mydomain.com' port: 636 uid: 'sAMAccountName' base: 'dc=example,dc=com' encryption: 'simple_tls'
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
For more information about the various LDAP options, see the ldap
setting in
gitlab.yml.example
.
This example results in a sign-in page with the following tabs:
- GitLab AD.
- GitLab Secondary AD.
- GitLab Tertiary AD.
Set up LDAP user filter
To limit all GitLab access to a subset of the LDAP users on your LDAP server, first narrow the
configured base
. However, to further filter users if
necessary, you can set up an LDAP user filter. The filter must comply with RFC 4515.
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['ldap_servers'] = { 'main' => { 'user_filter' => '(employeeType=developer)' } }
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: servers: main: user_filter: '(employeeType=developer)'
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_servers'] = { 'main' => { 'user_filter' => '(employeeType=developer)' } }
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
/home/git/gitlab/config/gitlab.yml
:production: &base ldap: servers: main: user_filter: '(employeeType=developer)'
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
To limit access to the nested members of an Active Directory group, use the following syntax:
(memberOf:1.2.840.113556.1.4.1941:=CN=My Group,DC=Example,DC=com)
For more information about LDAP_MATCHING_RULE_IN_CHAIN
filters, see
Search Filter Syntax.
Support for nested members in the user filter shouldn’t be confused with group sync nested groups support.
GitLab does not support the custom filter syntax used by OmniAuth LDAP.
Escape special characters in user_filter
The user_filter
DN can contain special characters. For example:
-
A comma:
OU=GitLab, Inc,DC=gitlab,DC=com
-
Open and close brackets:
OU=GitLab (Inc),DC=gitlab,DC=com
These characters must be escaped as documented in RFC 4515.
-
Escape commas with
\2C
. For example:OU=GitLab\2C Inc,DC=gitlab,DC=com
-
Escape open brackets with
\28
and close brackets with\29
. For example:OU=GitLab \28Inc\29,DC=gitlab,DC=com
Enable LDAP username lowercase
Some LDAP servers, depending on their configuration, can return uppercase usernames. This can lead to several confusing issues such as creating links or namespaces with uppercase names.
GitLab can automatically lowercase usernames provided by the LDAP server by enabling
the configuration option lowercase_usernames
. By default, this configuration option is false
.
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['ldap_servers'] = { 'main' => { 'lowercase_usernames' => true } }
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: servers: main: lowercase_usernames: true
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_servers'] = { 'main' => { 'lowercase_usernames' => true } }
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
config/gitlab.yaml
:production: ldap: servers: main: lowercase_usernames: true
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
Disable LDAP web sign in
It can be useful to prevent using LDAP credentials through the web UI when an alternative such as SAML is preferred. This allows LDAP to be used for group sync, while also allowing your SAML identity provider to handle additional checks like custom 2FA.
When LDAP web sign in is disabled, users don’t see an LDAP tab on the sign-in page. This does not disable using LDAP credentials for Git access.
-
Edit
/etc/gitlab/gitlab.rb
:gitlab_rails['prevent_ldap_sign_in'] = true
-
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
-
Export the Helm values:
helm get values gitlab > gitlab_values.yaml
-
Edit
gitlab_values.yaml
:global: appConfig: ldap: preventSignin: true
-
Save the file and apply the new values:
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
-
Edit
docker-compose.yml
:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['prevent_ldap_sign_in'] = true
-
Save the file and restart GitLab:
docker compose up -d
-
Edit
config/gitlab.yaml
:production: ldap: prevent_ldap_sign_in: true
-
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
Provide smart card authentication for GitLab
For more information on using smart cards with LDAP servers and GitLab, see Smart card authentication.
Use encrypted credentials
Instead of having the LDAP integration credentials stored in plaintext in the configuration files, you can optionally use an encrypted file for the LDAP credentials.
Prerequisites:
- To use encrypted credentials, you must first enable the encrypted configuration.
The encrypted configuration for LDAP exists in an encrypted YAML file. The
unencrypted contents of the file should be a subset of the secret settings from
your servers
block in the LDAP configuration.
The supported configuration items for the encrypted file are:
bind_dn
password
-
If initially your LDAP configuration in
/etc/gitlab/gitlab.rb
looked like:gitlab_rails['ldap_servers'] = { 'main' => { 'bind_dn' => 'admin', 'password' => '123' } }
-
Edit the encrypted secret:
sudo gitlab-rake gitlab:ldap:secret:edit EDITOR=vim
-
Enter the unencrypted contents of the LDAP secret:
main: bind_dn: admin password: '123'
- Edit
/etc/gitlab/gitlab.rb
and remove the settings forbind_dn
andpassword
. -
Save the file and reconfigure GitLab:
sudo gitlab-ctl reconfigure
Use a Kubernetes secret to store the LDAP password. For more information, read about Helm LDAP secrets.
-
If initially your LDAP configuration in
docker-compose.yml
looked like:version: "3.6" services: gitlab: image: 'gitlab/gitlab-ee:latest' restart: always hostname: 'gitlab.example.com' environment: GITLAB_OMNIBUS_CONFIG: | gitlab_rails['ldap_servers'] = { 'main' => { 'bind_dn' => 'admin', 'password' => '123' } }
-
Get inside the container, and edit the encrypted secret:
sudo docker exec -t <container_name> bash gitlab-rake gitlab:ldap:secret:edit EDITOR=vim
-
Enter the unencrypted contents of the LDAP secret:
main: bind_dn: admin password: '123'
- Edit
docker-compose.yml
and remove the settings forbind_dn
andpassword
. -
Save the file and restart GitLab:
docker compose up -d
-
If initially your LDAP configuration in
/home/git/gitlab/config/gitlab.yml
looked like:production: ldap: servers: main: bind_dn: admin password: '123'
-
Edit the encrypted secret:
bundle exec rake gitlab:ldap:secret:edit EDITOR=vim RAILS_ENVIRONMENT=production
-
Enter the unencrypted contents of the LDAP secret:
main: bind_dn: admin password: '123'
- Edit
/home/git/gitlab/config/gitlab.yml
and remove the settings forbind_dn
andpassword
. -
Save the file and restart GitLab:
# For systems running systemd sudo systemctl restart gitlab.target # For systems running SysV init sudo service gitlab restart
Updating LDAP DN and email
When an LDAP server creates a user in GitLab, the user’s LDAP DN is linked to their GitLab account as an identifier.
When a user tries to sign in with LDAP, GitLab tries to find the user using the DN saved on that user’s account.
- If GitLab finds the user by the DN and the user’s email address:
- Matches the GitLab account’s email address, GitLab does not take any further action.
- Has changed, GitLab updates its record of the user’s email to match the one in LDAP.
- If GitLab cannot find a user by their DN, it tries to find the user by their email. If GitLab:
- Finds the user by their email, GitLab updates the DN stored in the user’s GitLab account. Both values now match the information stored in LDAP.
- Cannot find the user by their email address (both the DN and the email address have changed), see User DN and email have changed.
Disable anonymous LDAP authentication
GitLab doesn’t support TLS client authentication. Complete these steps on your LDAP server.
- Disable anonymous authentication.
- Enable one of the following authentication types:
- Simple authentication.
- Simple Authentication and Security Layer (SASL) authentication.
The TLS client authentication setting in your LDAP server cannot be mandatory and clients cannot be authenticated with the TLS protocol.
Users deleted from LDAP
Users deleted from the LDAP server:
- Are immediately blocked from signing in to GitLab.
- No longer consume a license.
However, these users can continue to use Git with SSH until the next time the LDAP check cache runs.
To delete the account immediately, you can manually block the user.
Update user email addresses
Email addresses on the LDAP server are considered the source of truth for users when LDAP is used to sign in.
Updating user email addresses must be done on the LDAP server that manages the user. The email address for GitLab is updated either:
- When the user next signs in.
- When the next user sync is run.
The updated user’s previous email address becomes the secondary email address to preserve that user’s commit history.
You can find more details on the expected behavior of user updates in our LDAP troubleshooting section.
Google Secure LDAP
- Introduced in GitLab 11.9.
Google Cloud Identity provides a Secure LDAP service that can be configured with GitLab for authentication and group sync. See Google Secure LDAP for detailed configuration instructions.
Synchronize users and groups
For more information on synchronizing users and groups between LDAP and GitLab, see LDAP synchronization.
Move from LDAP to SAML
- Add SAML configuration to:
-
Optional. Disable the LDAP auth from the sign-in page.
-
Optional. To fix issues with linking users, you can first remove those users’ LDAP identities.
-
Confirm that users are able to sign in to their accounts. If a user cannot sign in, check if that user’s LDAP is still there and remove it if necessary. If this issue persists, check the logs to identify the problem.
- In the configuration file, change:
-
omniauth_auto_link_user
tosaml
only. -
omniauth_auto_link_ldap_user
to false. -
ldap_enabled
tofalse
. You can also comment out the LDAP provider settings.
-