Troubleshooting file export project migrations

If you have problems with migrating projects using file exports, see the possible solutions below.

Troubleshooting commands

Finds information about the status of the import and further logs using the JID, using the Rails console:

Project.find_by_full_path('group/project').import_state.slice(:jid, :status, :last_error)
> {"jid"=>"414dec93f941a593ea1a6894", "status"=>"finished", "last_error"=>nil}
# Logs
grep JID /var/log/gitlab/sidekiq/current
grep "Import/Export error" /var/log/gitlab/sidekiq/current
grep "Import/Export backtrace" /var/log/gitlab/sidekiq/current
tail /var/log/gitlab/gitlab-rails/importer.log

Project fails to import due to mismatch

If the shared runners enablement does not match between the exported project, and the project import, the project fails to import. Review issue 276930, and either:

  • Ensure shared runners are enabled in both the source and destination projects.
  • Disable shared runners on the parent group when you import the project.

Users missing from imported project

If users aren’t imported with imported projects, see the preserving user contributions requirements.

A common reason for missing users is that the public email setting isn’t configured for users. To resolve this issue, ask users to configure this setting using the GitLab UI.

If there are too many users for manual configuration to be feasible, you can set all user profiles to use a public email address using the Rails console:

User.where("public_email IS NULL OR public_email = '' ").find_each do |u|
  next if u.bot?

  puts "Setting #{u.username}'s currently empty public email to #{u.email}…"
  u.public_email = u.email
  u.save!
end

Import workarounds for large repositories

Maximum import size limitations can prevent an import from being successful. If changing the import limits is not possible, you can try one of the workarounds listed here.

Workaround option 1

The following local workflow can be used to temporarily reduce the repository size for another import attempt:

  1. Create a temporary working directory from the export:

    EXPORT=<filename-without-extension>
    
    mkdir "$EXPORT"
    tar -xf "$EXPORT".tar.gz --directory="$EXPORT"/
    cd "$EXPORT"/
    git clone project.bundle
    
    # Prevent interference with recreating an importable file later
    mv project.bundle ../"$EXPORT"-original.bundle
    mv ../"$EXPORT".tar.gz ../"$EXPORT"-original.tar.gz
    
    git switch --create smaller-tmp-main
    
  2. To reduce the repository size, work on this smaller-tmp-main branch: identify and remove large files or interactively rebase and fixup to reduce the number of commits.

    # Reduce the .git/objects/pack/ file size
    cd project
    git reflog expire --expire=now --all
    git gc --prune=now --aggressive
    
    # Prepare recreating an importable file
    git bundle create ../project.bundle <default-branch-name>
    cd ..
    mv project/ ../"$EXPORT"-project
    cd ..
    
    # Recreate an importable file
    tar -czf "$EXPORT"-smaller.tar.gz --directory="$EXPORT"/ .
    
  3. Import this new, smaller file into GitLab.
  4. In a full clone of the original repository, use git remote set-url origin <new-url> && git push --force --all to complete the import.
  5. Update the imported repository’s branch protection rules and its default branch, and delete the temporary, smaller-tmp-main branch, and the local, temporary data.

Workaround option 2

note
This workaround does not account for LFS objects.

Rather than attempting to push all changes at once, this workaround:

  • Separates the project import from the Git Repository import
  • Incrementally pushes the repository to GitLab
  1. Make a local clone of the repository to migrate. In a later step, you push this clone outside of the project export.
  2. Download the export and remove the project.bundle (which contains the Git repository):

    tar -czvf new_export.tar.gz --exclude='project.bundle' @old_export.tar.gz
    
  3. Import the export without a Git repository. It asks you to confirm to import without a repository.
  4. Save this bash script as a file and run it after adding the appropriate origin.

    #!/bin/sh
    
    # ASSUMPTIONS:
    # - The GitLab location is "origin"
    # - The default branch is "main"
    # - This will attempt to push in chunks of 500MB (dividing the total size by 500MB).
    #   Decrease this size to push in smaller chunks if you still receive timeouts.
    
    git gc
    SIZE=$(git count-objects -v 2> /dev/null | grep size-pack | awk '{print $2}')
    
    # Be conservative... and try to push 2GB at a time
    # (given this assumes each commit is the same size - which is wrong)
    BATCHES=$(($SIZE / 500000))
    TOTAL_COMMITS=$(git rev-list --count HEAD)
    if (( BATCHES > TOTAL_COMMITS )); then
        BATCHES=$TOTAL_COMMITS
    fi
    
    INCREMENTS=$(( ($TOTAL_COMMITS / $BATCHES) - 1 ))
    
    for (( BATCH=BATCHES; BATCH>=1; BATCH-- ))
    do
      COMMIT_NUM=$(( $BATCH - $INCREMENTS ))
      COMMIT_SHA=$(git log -n $COMMIT_NUM --format=format:%H | tail -1)
      git push -u origin ${COMMIT_SHA}:refs/heads/main
    done
    git push -u origin main
    git push -u origin --all
    git push -u origin --tags
    

Manually execute export steps

You usually export a project through the web interface or through the API. Exporting using these methods can sometimes fail without giving enough information to troubleshoot. In these cases, open a Rails console session and loop through all the defined exporters. Execute each line individually, rather than pasting the entire block at once, so you can see any errors each command returns.

# User needs to have permission to export
u = User.find_by_username('someuser')
p = Project.find_by_full_path('some/project')
e = Projects::ImportExport::ExportService.new(p,u)

e.send(:version_saver).send(:save)
e.send(:repo_saver).send(:save)
e.send(:avatar_saver).send(:save)
e.send(:project_tree_saver).send(:save)
e.send(:uploads_saver).send(:save)
e.send(:wiki_repo_saver).send(:save)
e.send(:lfs_saver).send(:save)
e.send(:snippets_repo_saver).send(:save)
e.send(:design_repo_saver).send(:save)
## continue using `e.send(:exporter_name).send(:save)` going through the list of exporters

# The following line should show you the export_path similar to /var/opt/gitlab/gitlab-rails/shared/tmp/gitlab_exports/@hashed/49/94/4994....
s = Gitlab::ImportExport::Saver.new(exportable: p, shared:p.import_export_shared)

# To try and upload use:
s.send(:compress_and_save)
s.send(:save_upload)

After the project is successfully uploaded, the exported project is located in a .tar.gz file in /var/opt/gitlab/gitlab-rails/uploads/-/system/import_export_upload/export_file/.

Import using the REST API fails when using a group access token

Group access tokens don’t work for project or group import operations. When a group access token initiates an import, the import fails with this message:

Error adding importer user to Project members.
Validation failed: User project bots cannot be added to other groups / projects

To use Import REST API, pass regular user account credentials such as personal access tokens.

Troubleshooting performance issues

Read through the current performance problems using the Import/Export below.

OOM errors

Out of memory (OOM) errors are usually caused by the Sidekiq Memory Killer:

SIDEKIQ_MEMORY_KILLER_MAX_RSS = 2000000
SIDEKIQ_MEMORY_KILLER_HARD_LIMIT_RSS = 3000000
SIDEKIQ_MEMORY_KILLER_GRACE_TIME = 900

An import status started, and the following Sidekiq logs signal a memory issue:

WARN: Work still in progress <struct with JID>

Timeouts

Timeout errors occur due to the Gitlab::Import::StuckProjectImportJobsWorker marking the process as failed:

module Gitlab
  module Import
    class StuckProjectImportJobsWorker
      include Gitlab::Import::StuckImportJob
      # ...
    end
  end
end

module Gitlab
  module Import
    module StuckImportJob
      # ...
      IMPORT_JOBS_EXPIRATION = 15.hours.to_i
      # ...
      def perform
        stuck_imports_without_jid_count = mark_imports_without_jid_as_failed!
        stuck_imports_with_jid_count = mark_imports_with_jid_as_failed!

        track_metrics(stuck_imports_with_jid_count, stuck_imports_without_jid_count)
      end
      # ...
    end
  end
end
Marked stuck import jobs as failed. JIDs: xyz
  +-----------+    +-----------------------------------+
  |Export Job |--->| Calls ActiveRecord `as_json` and  |
  +-----------+    | `to_json` on all project models   |
                   +-----------------------------------+

  +-----------+    +-----------------------------------+
  |Import Job |--->| Loads all JSON in memory, then    |
  +-----------+    | inserts into the DB in batches    |
                   +-----------------------------------+

Problems and solutions

ProblemPossible solutions
Slow JSON loading/dumping models from the databasesplit the worker
 Batch export
 Optimize SQL
 Move away from ActiveRecord callbacks (difficult)
High memory usage (see also some analysis)DB Commit sweet spot that uses less memory
  Netflix Fast JSON API may help
 Batch reading/writing to disk and any SQL

Temporary solutions

While the performance problems are not tackled, there is a process to workaround importing big projects, using a foreground import:

Foreground import of big projects for customers. (Using the import template in the infrastructure tracker)