Troubleshooting and debugging the database

This section is to help give some copy-pasta you can use as a reference when you run into some head-banging database problems.

A first step is to search for your error in Slack, or search for GitLab <my error> with Google.

Available RAILS_ENV:

  • production (generally not for your main GDK database, but you may need this for other installations such as Omnibus).
  • development (this is your main GDK db).
  • test (used for tests like RSpec).

Delete everything and start over

If you just want to delete everything and start over with an empty DB (approximately 1 minute):

bundle exec rake db:reset RAILS_ENV=development

If you want to seed the empty DB with sample data (approximately 4 minutes):

bundle exec rake dev:setup

If you just want to delete everything and start over with sample data (approximately 4 minutes). This also does db:reset and runs DB-specific migrations:

bundle exec rake db:setup RAILS_ENV=development

If your test DB is giving you problems, it is safe to delete everything because it doesn’t contain important data:

bundle exec rake db:reset RAILS_ENV=test

Migration wrangling

  • bundle exec rake db:migrate RAILS_ENV=development: Execute any pending migrations that you may have picked up from a MR
  • bundle exec rake db:migrate:status RAILS_ENV=development: Check if all migrations are up or down
  • bundle exec rake db:migrate:down:main VERSION=20170926203418 RAILS_ENV=development: Tear down a migration
  • bundle exec rake db:migrate:up:main VERSION=20170926203418 RAILS_ENV=development: Set up a migration
  • bundle exec rake db:migrate:redo:main VERSION=20170926203418 RAILS_ENV=development: Re-run a specific migration

Replace main in the above commands to execute against the ci database instead of main.

Manually access the database

Access the database via one of these commands (they all get you to the same place)

gdk psql -d gitlabhq_development
bundle exec rails dbconsole -e development
bundle exec rails db -e development
  • \q: Quit/exit
  • \dt: List all tables
  • \d+ issues: List columns for issues table
  • CREATE TABLE board_labels();: Create a table called board_labels
  • SELECT * FROM schema_migrations WHERE version = '20170926203418';: Check if a migration was run
  • DELETE FROM schema_migrations WHERE version = '20170926203418';: Manually remove a migration

Access the database with a GUI

Most GUIs (DataGrip, RubyMine, DBeaver) require a TCP connection to the database, but by default the database runs on a UNIX socket. To be able to access the database from these tools, some steps are needed:

  1. On the GDK root directory, run:

    gdk config set postgresql.host localhost
    
  2. Open your gdk.yml, and confirm that it has the following lines:

    postgresql:
       host: localhost
    
  3. Reconfigure GDK:

    gdk reconfigure
    
  4. On your database GUI, select localhost as host, 5432 as port and gitlabhq_development as database. Alternatively, you can use the connection string postgresql://localhost:5432/gitlabhq_development.

The new connection should be working now.

Access the GDK database with Visual Studio Code

Use these instructions for exploring the GitLab database while developing with the GDK:

  1. Install or open Visual Studio Code.
  2. Install the PostgreSQL VS Code Extension.
  3. In Visual Studio Code select PostgreSQL Explorer in the left toolbar.
  4. In the top bar of the new window, select + to Add Database Connection, and follow the prompts to fill in the details:
    1. Hostname: the path to the PostgreSQL folder in your GDK directory (for example /dev/gitlab-development-kit/postgresql).
    2. PostgreSQL user to authenticate as: usually your local username, unless otherwise specified during PostgreSQL installation.
    3. Password of the PostgreSQL user: the password you set when installing PostgreSQL.
    4. Port number to connect to: 5432 (default).
    5. Use an SSL connection? This depends on your installation. Options are:
      • Use Secure Connection
      • Standard Connection (default)
    6. Optional. The database to connect to: gitlabhq_development.
    7. The display name for the database connection: gitlabhq_development.

Your database connection should now be displayed in the PostgreSQL Explorer pane and you can explore the gitlabhq_development database. If you cannot connect, ensure that GDK is running. For further instructions on how to use the PostgreSQL Explorer Extension for Visual Studio Code, read the usage section of the extension documentation.

FAQ

ActiveRecord::PendingMigrationError with Spring

When running specs with the Spring pre-loader, the test database can get into a corrupted state. Trying to run the migration or dropping/resetting the test database has no effect.

$ bundle exec spring rspec some_spec.rb
...
Failure/Error: ActiveRecord::Migration.maintain_test_schema!

ActiveRecord::PendingMigrationError:


  Migrations are pending. To resolve this issue, run:

    bin/rake db:migrate RAILS_ENV=test
# ~/.rvm/gems/ruby-2.3.3/gems/activerecord-4.2.10/lib/active_record/migration.rb:392:in `check_pending!'
...
0 examples, 0 failures, 1 error occurred outside of examples

To resolve, you can kill the spring server and app that lives between spec runs.

$ ps aux | grep spring
eric             87304   1.3  2.9  3080836 482596   ??  Ss   10:12AM   4:08.36 spring app    | gitlab | started 6 hours ago | test mode
eric             37709   0.0  0.0  2518640   7524 s006  S    Wed11AM   0:00.79 spring server | gitlab | started 29 hours ago
$ kill 87304
$ kill 37709

db:migrate database version is too old to be migrated error

Users receive this error when db:migrate detects that the current schema version is older than the MIN_SCHEMA_VERSION defined in the Gitlab::Database library module.

Over time we cleanup/combine old migrations in the codebase, so it is not always possible to migrate GitLab from every previous version.

In some cases you may want to bypass this check. For example, if you were on a version of GitLab schema later than the MIN_SCHEMA_VERSION, and then rolled back the to an older migration, from before. In this case, to migrate forward again, you should set the SKIP_SCHEMA_VERSION_CHECK environment variable.

bundle exec rake db:migrate SKIP_SCHEMA_VERSION_CHECK=true