• Disable new sign ups
• Require administrator approval for new sign ups
• Confirm user email
• User cap
  • Set a user cap
  • Remove the user cap
• Minimum password length limit
  • Password complexity requirements
• Allow or deny sign ups using specific email domains
  • Allowlist email domains
  • Denylist email domains
  • Create email domain allowlist or denylist
• Set up LDAP user filter

Sign-up restrictions

You can enforce the following restrictions on sign ups:

• Disable new sign ups.
• Require administrator approval for new sign ups.
• Require user email confirmation.
• Allow or deny sign ups using specific email domains.

Disable new sign ups

By default, any user visiting your GitLab domain can sign up for an account. For customers running public-facing GitLab instances, we highly recommend that you consider disabling new sign ups if you do not expect public users to sign up for an account.

To disable sign ups:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Clear the Sign-up enabled checkbox, then select Save changes.

Require administrator approval for new sign ups

When this setting is enabled, any user visiting your GitLab domain and signing up for a new account using the registration form must be explicitly approved by an administrator before they can start using their account. In GitLab 13.6 and later, this setting is enabled by default for new GitLab instances. It is only applicable if sign ups are enabled.

To require administrator approval for new sign ups:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Select the Require admin approval for new sign-ups checkbox, then select Save changes.

In GitLab 13.7 and later, if an administrator disables this setting, the users in pending approval state are automatically approved in a background job.

Confirm user email

You can send confirmation emails during sign up and require that users confirm their email address before they are allowed to sign in.

To enforce confirmation of the email address used for new sign ups:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Under Email confirmation settings, select Hard.

The following settings are available:

• Hard - Send a confirmation email during sign up. New users must confirm their email address before they can log in.
• Soft - Send a confirmation email during sign up. New users can sign in immediately, but must confirm their email in three days. After three days, the user is not able to sign in until they confirm their email.
• Off - New users can sign up without confirming their email address.

User cap

The user cap is the maximum number of billable users who can sign up or be added to a subscription without administrator approval. After the user cap is reached, users who sign up or are added must be approved by an administrator. Users can use their account only after they have been approved by an administrator.

If an administrator increases or removes the user cap, users pending approval are automatically approved.

Set a user cap

Set a user cap to restrict the number of users who can sign up without administrator approval.

The number of billable users is updated once a day. The user cap might apply only retrospectively after the cap has already been exceeded. To ensure the cap is enabled immediately, set the cap to a value below the current number of billable users (for example, 1).

Prerequisite:

• You must be an administrator.

To set a user cap:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Enter a number in User cap.
6. Select Save changes.

Remove the user cap

Remove the user cap so that the number of new users who can sign up without administrator approval is not restricted.

After you remove the user cap, users pending approval are automatically approved.

Prerequisite:

• You must be an administrator.

To remove the user cap:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Remove the number from User cap.
6. Select Save changes.

Minimum password length limit

You can change the minimum number of characters a user must have in their password using the GitLab UI.

Password complexity requirements

By default, the only requirement for user passwords is minimum password length. You can add additional complexity requirements. Changes to password complexity requirements apply to new passwords:

• For new users that sign up.
• For existing users that reset their password.

Existing passwords are unaffected. To change password complexity requirements:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.
5. Under Minimum password length (number of characters), select additional password complexity requirements. You can require numbers, uppercase letters, lowercase letters, and symbols.
6. Select Save changes.

Allow or deny sign ups using specific email domains

You can specify an inclusive or exclusive list of email domains which can be used for user sign up.

These restrictions are only applied during sign up from an external user. An administrator can add a user through the administrator panel with a disallowed domain. The users can also change their email addresses to disallowed domains after sign up.

Allowlist email domains

You can restrict users only to sign up using email addresses matching the given domains list.

Denylist email domains

You can block users from signing up when using an email addresses of specific domains. This can reduce the risk of malicious users creating spam accounts with disposable email addresses.

Create email domain allowlist or denylist

To create an email domain allowlist or denylist:

1. On the left sidebar, select Search or go to.
2. Select Admin Area.
3. Select Settings > General.
4. Expand Sign-up restrictions.

5. For the allowlist, you must enter the list manually. For the denylist, you can enter the list manually or upload a .txt file that contains list entries.

   Both the allowlist and denylist accept wildcards. For example, you can use *.company.com to accept every company.com subdomain, or *.io to block all domains ending in .io. Domains must be separated by a whitespace, semicolon, comma, or a new line.

   

Set up LDAP user filter

You can limit GitLab access to a subset of the LDAP users on your LDAP server.

See the documentation on setting up an LDAP user filter for more information.