Cross-origin resource sharing
Supported OAuth 2.0 flows
Access GitLab API with access token
Access Git over HTTPS with access token
Retrieve the token information
- Deprecated fields
Revoke a token
OAuth 2.0 tokens and GitLab registries

OAuth 2.0 identity provider API

GitLab provides an API to allow third-party services to access GitLab resources on a user’s behalf with the OAuth 2.0 protocol.

To configure GitLab for this, see Configure GitLab as an OAuth 2.0 authentication identity provider.

This functionality is based on the doorkeeper Ruby gem.

CORS preflight request support introduced in GitLab 15.1.

Many /oauth endpoints support cross-origin resource sharing (CORS). From GitLab 15.1, the following endpoints also support CORS preflight requests:

/oauth/revoke
/oauth/token
/oauth/userinfo

Only certain headers can be used for preflight requests:

The headers listed for simple requests.
The Authorization header.

For example, the X-Requested-With header can’t be used for preflight requests.

Supported OAuth 2.0 flows

GitLab supports the following authorization flows:

Authorization code with Proof Key for Code Exchange (PKCE): Most secure. Without PKCE, you’d have to include client secrets on mobile clients, and is recommended for both client and server apps.
Authorization code: Secure and common flow. Recommended option for secure server-side apps.
Resource owner password credentials: To be used only for securely hosted, first-party services. GitLab recommends against use of this flow.

Device Authorization Grant is not supported. Issue 332682 proposes to add support.

The draft specification for OAuth 2.1 specifically omits both the Implicit grant and Resource Owner Password Credentials flows.

Refer to the OAuth RFC to find out how all those flows work and pick the right one for your use case.

Authorization code (with or without PKCE) flow requires application to be registered first via the /profile/applications page in your user’s account. During registration, by enabling proper scopes, you can limit the range of resources which the application can access. Upon creation, you obtain the application credentials: Application ID and Client Secret. The Client Secret must be kept secure. It is also advantageous to keep the Application ID secret when your application architecture allows.

For a list of scopes in GitLab, see the provider documentation.

Prevent CSRF attacks

To protect redirect-based flows, the OAuth specification recommends the use of “One-time use CSRF tokens carried in the state parameter, which are securely bound to the user agent”, with each request to the /oauth/authorize endpoint. This can prevent CSRF attacks.

Use HTTPS in production

For production, please use HTTPS for your redirect_uri. For development, GitLab allows insecure HTTP redirect URIs.

As OAuth 2.0 bases its security entirely on the transport layer, you should not use unprotected URIs. For more information, see the OAuth 2.0 RFC and the OAuth 2.0 Threat Model RFC.

In the following sections you can find detailed instructions on how to obtain authorization with each flow.

Authorization code with Proof Key for Code Exchange (PKCE)

The PKCE RFC includes a detailed flow description, from authorization request through access token. The following steps describe our implementation of the flow.

The Authorization code with PKCE flow, PKCE for short, makes it possible to securely perform the OAuth exchange of client credentials for access tokens on public clients without requiring access to the Client Secret at all. This makes the PKCE flow advantageous for single page JavaScript applications or other client side apps where keeping secrets from the user is a technical impossibility.

Before starting the flow, generate the STATE, the CODE_VERIFIER and the CODE_CHALLENGE.

The STATE a value that can’t be predicted used by the client to maintain state between the request and callback. It should also be used as a CSRF token.
The CODE_VERIFIER is a random string, between 43 and 128 characters in length, which use the characters A-Z, a-z, 0-9, -, ., _, and ~.
The CODE_CHALLENGE is an URL-safe base64-encoded string of the SHA256 hash of the CODE_VERIFIER
- The SHA256 hash must be in binary format before encoding.
- In Ruby, you can set that up with Base64.urlsafe_encode64(Digest::SHA256.digest(CODE_VERIFIER), padding: false).
- For reference, a CODE_VERIFIER string of ks02i3jdikdo2k0dkfodf3m39rjfjsdk0wk349rj3jrhf when hashed and encoded using the Ruby snippet above produces a CODE_CHALLENGE string of 2i0WFA-0AerkjQm4X4oDEhqA17QIAKNjXpagHBXmO_U.

Request authorization code. To do that, you should redirect the user to the /oauth/authorize page with the following query parameters:
```
https://gitlab.example.com/oauth/authorize?client_id=APP_ID&redirect_uri=REDIRECT_URI&response_type=code&state=STATE&scope=REQUESTED_SCOPES&code_challenge=CODE_CHALLENGE&code_challenge_method=S256
```
This page asks the user to approve the request from the app to access their account based on the scopes specified in REQUESTED_SCOPES. The user is then redirected back to the specified REDIRECT_URI. The scope parameter is a space-separated list of scopes associated with the user. For example,scope=read_user+profile requests the read_user and profile scopes. The redirect includes the authorization code, for example:
```
https://example.com/oauth/redirect?code=1234567890&state=STATE
```

With the authorization code returned from the previous request (denoted as RETURNED_CODE in the following example), you can request an access_token, with any HTTP client. The following example uses Ruby’s rest-client:

parameters = 'client_id=APP_ID&code=RETURNED_CODE&grant_type=authorization_code&redirect_uri=REDIRECT_URI&code_verifier=CODE_VERIFIER'
RestClient.post 'https://gitlab.example.com/oauth/token', parameters

Example response:

{
 "access_token": "de6780bc506a0446309bd9362820ba8aed28aa506c71eedbe1c5c4f9dd350e54",
 "token_type": "bearer",
 "expires_in": 7200,
 "refresh_token": "8257e65c97202ed1726cf9571600918f3bffb2544b26e00a61df9897668c33a1",
 "created_at": 1607635748
}

To retrieve a new access_token, use the refresh_token parameter. Refresh tokens may be used even after the access_token itself expires. This request:

Invalidates the existing access_token and refresh_token.
Sends new tokens in the response.

  parameters = 'client_id=APP_ID&refresh_token=REFRESH_TOKEN&grant_type=refresh_token&redirect_uri=REDIRECT_URI&code_verifier=CODE_VERIFIER'
  RestClient.post 'https://gitlab.example.com/oauth/token', parameters

Example response:

{
  "access_token": "c97d1fe52119f38c7f67f0a14db68d60caa35ddc86fd12401718b649dcfa9c68",
  "token_type": "bearer",
  "expires_in": 7200,
  "refresh_token": "803c1fd487fec35562c205dac93e9d8e08f9d3652a24079d704df3039df1158f",
  "created_at": 1628711391
}

The redirect_uri must match the redirect_uri used in the original authorization request.

You can now make requests to the API with the access token.

Authorization code flow

Check the RFC spec for a detailed flow description.

The authorization code flow is essentially the same as authorization code flow with PKCE,

Before starting the flow, generate the STATE. It is a value that can’t be predicted used by the client to maintain state between the request and callback. It should also be used as a CSRF token.

Request authorization code. To do that, you should redirect the user to the /oauth/authorize page with the following query parameters:
```
https://gitlab.example.com/oauth/authorize?client_id=APP_ID&redirect_uri=REDIRECT_URI&response_type=code&state=STATE&scope=REQUESTED_SCOPES
```
This page asks the user to approve the request from the app to access their account based on the scopes specified in REQUESTED_SCOPES. The user is then redirected back to the specified REDIRECT_URI. The scope parameter is a space-separated list of scopes associated with the user. For example,scope=read_user+profile requests the read_user and profile scopes. The redirect includes the authorization code, for example:
```
https://example.com/oauth/redirect?code=1234567890&state=STATE
```

With the authorization code returned from the previous request (shown as RETURNED_CODE in the following example), you can request an access_token, with any HTTP client. The following example uses Ruby’s rest-client:

parameters = 'client_id=APP_ID&client_secret=APP_SECRET&code=RETURNED_CODE&grant_type=authorization_code&redirect_uri=REDIRECT_URI'
RestClient.post 'https://gitlab.example.com/oauth/token', parameters

Example response:

{
 "access_token": "de6780bc506a0446309bd9362820ba8aed28aa506c71eedbe1c5c4f9dd350e54",
 "token_type": "bearer",
 "expires_in": 7200,
 "refresh_token": "8257e65c97202ed1726cf9571600918f3bffb2544b26e00a61df9897668c33a1",
 "created_at": 1607635748
}

To retrieve a new access_token, use the refresh_token parameter. Refresh tokens may be used even after the access_token itself expires. This request:

Invalidates the existing access_token and refresh_token.
Sends new tokens in the response.

  parameters = 'client_id=APP_ID&client_secret=APP_SECRET&refresh_token=REFRESH_TOKEN&grant_type=refresh_token&redirect_uri=REDIRECT_URI'
  RestClient.post 'https://gitlab.example.com/oauth/token', parameters

Example response:

{
  "access_token": "c97d1fe52119f38c7f67f0a14db68d60caa35ddc86fd12401718b649dcfa9c68",
  "token_type": "bearer",
  "expires_in": 7200,
  "refresh_token": "803c1fd487fec35562c205dac93e9d8e08f9d3652a24079d704df3039df1158f",
  "created_at": 1628711391
}

The redirect_uri must match the redirect_uri used in the original authorization request.

You can now make requests to the API with the access token returned.

Resource owner password credentials flow

Check the RFC spec for a detailed flow description.

The Resource Owner Password Credentials is disabled for users with two-factor authentication turned on. These users can access the API using personal access tokens instead.

In this flow, a token is requested in exchange for the resource owner credentials (username and password).

The credentials should only be used when:

There is a high degree of trust between the resource owner and the client. For example, the client is part of the device operating system or a highly privileged application.
Other authorization grant types are not available (such as an authorization code).

Never store the user’s credentials and only use this grant type when your client is deployed to a trusted environment, in 99% of cases personal access tokens are a better choice.

Even though this grant type requires direct client access to the resource owner credentials, the resource owner credentials are used for a single request and are exchanged for an access token. This grant type can eliminate the need for the client to store the resource owner credentials for future use, by exchanging the credentials with a long-lived access token or refresh token.

To request an access token, you must make a POST request to /oauth/token with the following parameters:

{
  "grant_type"    : "password",
  "username"      : "user@example.com",
  "password"      : "secret"
}

Example cURL request:

echo 'grant_type=password&username=<your_username>&password=<your_password>' > auth.txt
curl --data "@auth.txt" --request POST "https://gitlab.example.com/oauth/token"

You can also use this grant flow with registered OAuth applications, by using HTTP Basic Authentication with the application’s client_id and client_secret:

echo 'grant_type=password&username=<your_username>&password=<your_password>' > auth.txt
curl --data "@auth.txt" --user client_id:client_secret \
     --request POST "https://gitlab.example.com/oauth/token"

Then, you receive a response containing the access token:

{
  "access_token": "1f0af717251950dbd4d73154fdf0a474a5c5119adad999683f5b450c460726aa",
  "token_type": "bearer",
  "expires_in": 7200
}

By default, the scope of the access token is api, which provides complete read/write access.

For testing, you can use the oauth2 Ruby gem:

client = OAuth2::Client.new('the_client_id', 'the_client_secret', :site => "https://example.com")
access_token = client.password.get_token('user@example.com', 'secret')
puts access_token.token

Access GitLab API with `access token`

The access token allows you to make requests to the API on behalf of a user. You can pass the token either as GET parameter:

GET https://gitlab.example.com/api/v4/user?access_token=OAUTH-TOKEN

or you can put the token to the Authorization header:

curl --header "Authorization: Bearer OAUTH-TOKEN" "https://gitlab.example.com/api/v4/user"

Access Git over HTTPS with `access token`

A token with scope read_repository or write_repository can access Git over HTTPS. Use the token as the password. The username must be oauth2, not your username:

https://oauth2:<your_access_token>@gitlab.example.com/project_path/project_name.git

Alternatively, you can use a Git credential helper to authenticate to GitLab with OAuth. This handles OAuth token refresh automatically.

Retrieve the token information

To verify the details of a token, use the token/info endpoint provided by the Doorkeeper gem. For more information, see /oauth/token/info.

You must supply the access token, either:

As a parameter:

 GET https://gitlab.example.com/oauth/token/info?access_token=<OAUTH-TOKEN>

In the Authorization header:

 curl --header "Authorization: Bearer <OAUTH-TOKEN>" "https://gitlab.example.com/oauth/token/info"

The following is an example response:

{
    "resource_owner_id": 1,
    "scope": ["api"],
    "expires_in": null,
    "application": {"uid": "1cb242f495280beb4291e64bee2a17f330902e499882fe8e1e2aa875519cab33"},
    "created_at": 1575890427
}

Deprecated fields

The fields scopes and expires_in_seconds are included in the response.

These fields are aliases for scope and expires_in respectively, and have been included to prevent breaking changes introduced in doorkeeper 5.0.2.

Don’t rely on these fields as they are slated for removal in a later release.

Revoke a token

To revoke a token, use the revoke endpoint. The API returns a 200 response code and an empty JSON hash to indicate success.

parameters = 'client_id=APP_ID&client_secret=APP_SECRET&token=TOKEN'
RestClient.post 'https://gitlab.example.com/oauth/revoke', parameters

OAuth 2.0 tokens and GitLab registries

Standard OAuth 2.0 tokens support different degrees of access to GitLab registries, as they:

Do not allow users to authenticate to:
- The GitLab Container registry.
- Packages listed in the GitLab Package registry.
Allow users to get, list, and delete registries through the Container registry API.

OAuth 2.0 identity provider API

Supported OAuth 2.0 flows

Prevent CSRF attacks

Use HTTPS in production

Authorization code with Proof Key for Code Exchange (PKCE)

Authorization code flow

Resource owner password credentials flow

Access GitLab API with `access token`

Access Git over HTTPS with `access token`

Retrieve the token information

Deprecated fields

Revoke a token

OAuth 2.0 tokens and GitLab registries

Help & feedback

Docs

Product

Feature availability and product trials

Get Help

OAuth 2.0 identity provider API

Cross-origin resource sharing

Supported OAuth 2.0 flows

Prevent CSRF attacks

Use HTTPS in production

Authorization code with Proof Key for Code Exchange (PKCE)

Authorization code flow

Resource owner password credentials flow

Access GitLab API with access token

Access Git over HTTPS with access token

Retrieve the token information

Deprecated fields

Revoke a token

OAuth 2.0 tokens and GitLab registries

Help & feedback

Docs

Product

Feature availability and product trials

Get Help

Access GitLab API with `access token`

Access Git over HTTPS with `access token`