Running GitLab in a memory-constrained environment

GitLab requires a significant amount of memory when running with all features enabled. There are use-cases such as running GitLab on smaller installations where not all functionality is required. Examples include:

  • Running GitLab for personal use or very small teams.
  • Using a small instance on a cloud provider for cost savings.
  • Using resource-constrained devices like the Raspberry PI.

With some adjustments, GitLab can run comfortably on much lower specifications than described in minimum requirements or the reference architectures.

The following sections contain advice that will allow GitLab to run in environments that do not meet the minimum requirements. While most GitLab parts should be functional with these settings in place, you may experience unexpected degradation of both product functionality and performance. You should be able to run GitLab with up to 5 developers with individual Git projects no larger than 100MB.

Minimum requirements for constrained environments

The minimum expected specs with which GitLab can be run are:

  • Linux-based system (ideally Debian-based or RedHat-based)
  • 4 CPU cores of ARM7/ARM64 or 1 CPU core of AMD64 architecture
  • Minimum 2GB of RAM + 1GB of SWAP, optimally 2.5GB of RAM + 1GB of SWAP
  • 20GB of available storage
  • A storage with a good random I/O performance with an order of preference:

Of the above list, the single-core performance of the CPU and the random I/O performance of the storage have the highest impact. Storage is especially relevant since in a constrained environment we expect some amount of memory swapping to happen which puts more pressure on a used disk. A common problem for the limited performance of small platforms is very slow disk storage, which leads to a system-wide bottleneck.

With these minimal settings, the system should use swap during regular operation. Since not all components are used at the same time, it should provide acceptable performance.

Validate the performance of your system

There are number of tools available that allow you to validate the performance of your Linux-based system. One of the projects that can aid with checking the performance of your system is sbc-bench. It describes all caveats of system testing and the impact of different behaviors on the performance of your system, which is especially important when running GitLab in an embedded system. It can be used as a way to validate if the performance of your system is good enough to run GitLab on a constrained environment.

These systems provide adequate performance to run a small installations of GitLab:

Configure Swap

Before you install GitLab you need swap to be configured. Swap is a dedicated space on disk that is used when physical RAM is full. When a Linux system runs out of RAM, inactive pages are moved from RAM to the swap space.

Swap usage is often considered a problem as it can increase latency. However, due to how GitLab functions, much of the memory that is allocated is not frequently accessed. Using swap allows the application to run and function normally, and use swap only from time to time.

A general guideline is to configure swap to be around 50% of the available memory. For memory constrained environments, it is advised to configure at least 1GB of swap for the system. There are a number of guides on how to do it:

Once configured, you should validate that swap is properly enabled:

free -h
              total        used        free      shared  buff/cache   available
Mem:          1.9Gi       115Mi       1.4Gi       0.0Ki       475Mi       1.6Gi
Swap:         1.0Gi          0B       1.0Gi

You might also configure how often the system will use the swap space with adjusting /proc/sys/vm/swappiness. Swappiness ranges between 0 and 100. The default value is 60. A lower value reduces Linux’s preference to free anonymous memory pages and write them to swap, but it increases its preference for doing the same with file-backed pages:

  1. Configure it in the current session:

    sudo sysctl vm.swappiness=10

  2. Edit /etc/sysctl.conf to make it permanent:

    vm.swappiness=10

Install GitLab

In a memory-constrained environment, you should consider which GitLab distribution is right for you.

GitLab Enterprise Edition (EE) comes with significantly more features than GitLab Community Edition (CE), but all these additional features increase compute and memory requirements.

When memory consumption is the primary concern, install GitLab CE. You can always upgrade to GitLab EE later.

Optimize Puma

caution
This is an experimental Alpha feature and subject to change without notice. The feature is not ready for production use. If you want to use this feature, we recommend testing with non-production data first. See the known issues for additional details.

GitLab by default runs with a configuration that is designed to handle many concurrent connections.

For small installations, which do not require high throughput, consider disabling Puma Clustered mode. As the result, only a single Puma process would serve the application.

In /etc/gitlab/gitlab.rb:

puma['worker_processes'] = 0

We observed 100-400MB of memory usage reduction configuring Puma this way.

Optimize Sidekiq

Sidekiq is a background processing daemon. When configured with GitLab by default it runs with a high concurrency mode of 50. This does impact how much memory it can allocate at a given time. It is advised to configure it to use a significantly smaller value of 5 or 10 (preferred).

In /etc/gitlab/gitlab.rb:

sidekiq['max_concurrency'] = 10

Optimize Gitaly

Gitaly is a storage service that allows efficient access to Git-based repositories. It is advised to configure a maximum concurrency and memory limits enforced by Gitaly.

In /etc/gitlab/gitlab.rb:

gitaly['configuration'] = {
    concurrency: [
      {
        'rpc' => "/gitaly.SmartHTTPService/PostReceivePack",
        'max_per_repo' => 3,
      }, {
        'rpc' => "/gitaly.SSHService/SSHUploadPack",
        'max_per_repo' => 3,
      },
    ],
    cgroups: {
        repositories: {
            count: 2,
        },
        mountpoint: '/sys/fs/cgroup',
        hierarchy_root: 'gitaly',
        memory_bytes: 500000,
        cpu_shares: 512,
    },
}

gitaly['env'] = {
  'GITALY_COMMAND_SPAWN_MAX_PARALLEL' => '2'
}

Disable monitoring

GitLab enables all services by default to provide a complete DevOps solution without any additional configuration. Some of the default services, like monitoring, are not essential for GitLab to function and can be disabled to save memory.

In /etc/gitlab/gitlab.rb:

prometheus_monitoring['enable'] = false

We observed 200MB of memory usage reduction configuring GitLab this way.

Configure how GitLab handles memory

GitLab consists of many components (written in Ruby and Go), with GitLab Rails being the biggest one and consuming the most of memory.

GitLab Rails uses jemalloc as a memory allocator. jemalloc preallocates memory in bigger chunks that are also being held for longer periods in order to improve performance. At the expense of some performance loss, you can configure GitLab to free memory right after it is no longer needed instead of holding it for a longer periods.

In /etc/gitlab/gitlab.rb:

gitlab_rails['env'] = {
  'MALLOC_CONF' => 'dirty_decay_ms:1000,muzzy_decay_ms:1000'
}

gitaly['env'] = {
  'MALLOC_CONF' => 'dirty_decay_ms:1000,muzzy_decay_ms:1000'
}

We observed much more stable memory usage during the execution of the application.

Disable additional in-application monitoring

GitLab uses internal data structures to measure different aspects of itself. These features are no longer needed if monitoring is disabled.

To disable these features you need to go to Admin Area of GitLab and disable the Prometheus Metrics feature:

  1. On the left sidebar, select Search or go to.
  2. Select Admin Area.
  3. Select Settings > Metrics and profiling.
  4. Expand Metrics - Prometheus.
  5. Disable Enable Prometheus Metrics.
  6. Select Save changes.

Configuration with all the changes

  1. If you apply everything described so far, your /etc/gitlab/gitlab.rb file should contain the following configuration:

    puma['worker_processes'] = 0

sidekiq['max_concurrency'] = 10

prometheus_monitoring['enable'] = false

gitlab_rails['env'] = {
  'MALLOC_CONF' => 'dirty_decay_ms:1000,muzzy_decay_ms:1000'
}

gitaly['configuration'] = {
  concurrency: [
    {
      'rpc' => "/gitaly.SmartHTTPService/PostReceivePack",
      'max_per_repo' => 3,
    }, {
      'rpc' => "/gitaly.SSHService/SSHUploadPack",
      'max_per_repo' => 3,
    },
  ],
  cgroups: {
    repositories: {
      count: 2,
    },
    mountpoint: '/sys/fs/cgroup',
    hierarchy_root: 'gitaly',
    memory_bytes: 500000,
    cpu_shares: 512,
  },
}
gitaly['env'] = {
  'MALLOC_CONF' => 'dirty_decay_ms:1000,muzzy_decay_ms:1000',
  'GITALY_COMMAND_SPAWN_MAX_PARALLEL' => '2'
}

  2. After you make all these changes, reconfigure GitLab to use the new settings:

    sudo gitlab-ctl reconfigure

    This operation could take a while, since GitLab did not work with memory conservative settings up-to this point.

Performance results

After applying the above configuration, you can expect the following memory usage:

              total        used        free      shared  buff/cache   available
Mem:          1.9Gi       1.7Gi       151Mi        31Mi       132Mi       102Mi
Swap:         1.0Gi       153Mi       870Mi