• Prerequisites
  • Supported images and packages
• Enable or turn off the Dependency Proxy for a group
• View the Dependency Proxy
• Use the Dependency Proxy for Docker images
  • Authenticate with the Dependency Proxy
    • SAML SSO
    • Authenticate within CI/CD
  • Store a Docker image in Dependency Proxy cache
• Reduce storage usage
• Docker Hub rate limits and the Dependency Proxy
  • How does GitLab know if a cached tagged image is stale?
  • Check your Docker Hub rate limit
    • Check the rate limit in a CI/CD job
• Troubleshooting
  • Authentication error: “HTTP Basic: Access Denied”
  • Dependency Proxy Connection Failure
  • Issues when authenticating to the Dependency Proxy from CI/CD jobs
  • Not Found or 404 error when pulling image
  • exec format error when running images from the dependency proxy

Dependency Proxy

The GitLab Dependency Proxy is a local proxy you can use for your frequently-accessed upstream images.

In the case of CI/CD, the Dependency Proxy receives a request and returns the upstream image from a registry, acting as a pull-through cache.

Prerequisites

To use the Dependency Proxy, it must be enabled for the GitLab instance. It’s enabled by default, but administrators can turn it off.

Supported images and packages

The following images and packages are supported.

For a list of planned additions, view the direction page.

Enable or turn off the Dependency Proxy for a group

To enable or turn off the Dependency Proxy for a group:

1. On the left sidebar, select Search or go to and find your group.
2. Select Settings > Packages and registries.
3. Expand the Dependency Proxy section.
4. To enable the proxy, turn on Enable Proxy. To turn it off, turn the toggle off.

This setting only affects the Dependency Proxy for a group. Only an administrator can turn the Dependency Proxy on or off for the entire GitLab instance.

View the Dependency Proxy

To view the Dependency Proxy:

1. On the left sidebar, select Search or go to and find your group.
2. Select Operate > Dependency Proxy.

The Dependency Proxy is not available for projects.

Use the Dependency Proxy for Docker images

You can use GitLab as a source for your Docker images.

Prerequisites:

• Your images must be stored on Docker Hub.

Authenticate with the Dependency Proxy

Because the Dependency Proxy is storing Docker images in a space associated with your group, you must authenticate against the Dependency Proxy.

Follow the instructions for using images from a private registry, but instead of using registry.example.com:5000, use your GitLab domain with no port gitlab.example.com.

For example, to manually sign in:

docker login gitlab.example.com --username my_username --password my_password

You can authenticate using:

• Your GitLab username and password.
• A personal access token with the scope set to read_registry and write_registry.
• A group deploy token with the scope set to read_registry and write_registry.
• A group access token for the group, with the scope set to read_registry and write_registry.

Users accessing the Dependency Proxy with a personal access token or username and password must have at least the Guest role for the group they pull images from.

The Dependency Proxy follows the Docker v2 token authentication flow, issuing the client a JWT to use for the pull requests. The JWT issued as a result of authenticating expires after some time. When the token expires, most Docker clients store your credentials and automatically request a new token without further action.

The token expiration time is a configurable setting. On GitLab.com, the expiration time is 15 minutes.

SAML SSO

When SSO enforcement is enabled, users must be signed-in through SSO before they can pull images through the Dependency Proxy.

Authenticate within CI/CD

Runners sign in to the Dependency Proxy automatically. To pull through the Dependency Proxy, use one of the predefined variables:

• CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX pulls through the top-level group.
• CI_DEPENDENCY_PROXY_DIRECT_GROUP_IMAGE_PREFIX pulls through the subgroup, or direct group the project exists in.

Example pulling the latest alpine image:

# .gitlab-ci.yml
image: ${CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX}/alpine:latest

There are other additional predefined CI/CD variables you can also use:

• CI_DEPENDENCY_PROXY_USER: A CI/CD user for logging in to the Dependency Proxy.
• CI_DEPENDENCY_PROXY_PASSWORD: A CI/CD password for logging in to the Dependency Proxy.
• CI_DEPENDENCY_PROXY_SERVER: The server for logging in to the Dependency Proxy.
• CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX: the image prefix for pulling images through the dependency proxy from the top-level group.
• CI_DEPENDENCY_PROXY_DIRECT_GROUP_IMAGE_PREFIX: the image prefix for pulling images through the dependency proxy from the direct group or subgroup that the project belongs to.

CI_DEPENDENCY_PROXY_SERVER, CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX, and CI_DEPENDENCY_PROXY_DIRECT_GROUP_IMAGE_PREFIX include the server port. If you explicitly include the Dependency Proxy path, the port must be included, unless you have logged into the Dependency Proxy manually without including the port:

docker pull gitlab.example.com:443/my-group/dependency_proxy/containers/alpine:latest

Example when using the Dependency Proxy to build an image:

# Dockerfile
FROM gitlab.example.com:443/my-group/dependency_proxy/containers/alpine:latest

# .gitlab-ci.yml
image: docker:20.10.16

variables:
  DOCKER_HOST: tcp://docker:2375
  DOCKER_TLS_CERTDIR: ""

services:
  - docker:20.10.16-dind

build:
  image: docker:20.10.16
  before_script:
    - docker login -u $CI_DEPENDENCY_PROXY_USER -p $CI_DEPENDENCY_PROXY_PASSWORD $CI_DEPENDENCY_PROXY_SERVER
  script:
    -  docker build -t test .

You can also use custom CI/CD variables to store and access your personal access token or deploy token.

Store a Docker image in Dependency Proxy cache

To store a Docker image in Dependency Proxy storage:

1. On the left sidebar, select Search or go to and find your group.
2. Select Operate > Dependency Proxy.
3. Copy the Dependency Proxy image prefix.
4. Use one of these commands. In these examples, the image is alpine:latest.

5. You can also pull images by digest to specify exactly which version of an image to pull.

   • Pull an image by tag by adding the image to your .gitlab-ci.yml file:

     image: gitlab.example.com/groupname/dependency_proxy/containers/alpine:latest
     

   • Pull an image by digest by adding the image to your .gitlab-ci.yml file:

     image: ${CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX}/alpine@sha256:c9375e662992791e3f39e919b26f510e5254b42792519c180aad254e6b38f4dc
     

   • Manually pull the Docker image:

     docker pull gitlab.example.com/groupname/dependency_proxy/containers/alpine:latest
     

   • Add the URL to a Dockerfile:

     FROM gitlab.example.com/groupname/dependency_proxy/containers/alpine:latest
     

GitLab pulls the Docker image from Docker Hub and caches the blobs on the GitLab server. The next time you pull the same image, GitLab gets the latest information about the image from Docker Hub, but serves the existing blobs from the GitLab server.

Reduce storage usage

For information on reducing your storage use on the Dependency Proxy, see Reduce Dependency Proxy storage use.

Docker Hub rate limits and the Dependency Proxy

Watch how to use the Dependency Proxy to help avoid Docker Hub rate limits.

In November 2020, Docker introduced rate limits on pull requests from Docker Hub. If your GitLab CI/CD configuration uses an image from Docker Hub, each time a job runs, it may count as a pull request. To help get around this limit, you can pull your image from the Dependency Proxy cache instead.

When you pull an image (by using a command like docker pull or, in a .gitlab-ci.yml file, image: foo:latest), the Docker client makes a collection of requests:

1. The image manifest is requested. The manifest contains information about how to build the image.
2. Using the manifest, the Docker client requests a collection of layers, also known as blobs, one at a time.

The Docker Hub rate limit is based on the number of GET requests for the manifest. The Dependency Proxy caches both the manifest and blobs for a given image, so when you request it again, Docker Hub does not have to be contacted.

How does GitLab know if a cached tagged image is stale?

If you are using an image tag like alpine:latest, the image changes over time. Each time it changes, the manifest contains different information about which blobs to request. The Dependency Proxy does not pull a new image each time the manifest changes; it checks only when the manifest becomes stale.

Docker does not count HEAD requests for the image manifest towards the rate limit. You can make a HEAD request for alpine:latest, view the digest (checksum) value returned in the header, and determine if a manifest has changed.

The Dependency Proxy starts all requests with a HEAD request. If the manifest has become stale, only then is a new image pulled.

For example, if your pipeline pulls node:latest every five minutes, the Dependency Proxy caches the entire image and only updates it if node:latest changes. So instead of having 360 requests for the image in six hours (which exceeds the Docker Hub rate limit), you only have one pull request, unless the manifest changed during that time.

Check your Docker Hub rate limit

If you are curious about how many requests to Docker Hub you have made and how many remain, you can run these commands from your runner, or even in a CI/CD script:

# Note, you must have jq installed to run this command
TOKEN=$(curl "https://auth.docker.io/token?service=registry.docker.io&scope=repository:ratelimitpreview/test:pull" | jq --raw-output .token) && curl --head --header "Authorization: Bearer $TOKEN" "https://registry-1.docker.io/v2/ratelimitpreview/test/manifests/latest" 2>&1 | grep --ignore-case RateLimit
...

The output is something like:

RateLimit-Limit: 100;w=21600
RateLimit-Remaining: 98;w=21600

This example shows the total limit of 100 pulls in six hours, with 98 pulls remaining.

Check the rate limit in a CI/CD job

This example shows a GitLab CI/CD job that uses an image with jq and curl installed:

hub_docker_quota_check:
    stage: build
    image: alpine:latest
    tags:
        - <optional_runner_tag>
    before_script: apk add curl jq
    script:
      - |
        TOKEN=$(curl "https://auth.docker.io/token?service=registry.docker.io&scope=repository:ratelimitpreview/test:pull" | jq --raw-output .token) && curl --head --header "Authorization: Bearer $TOKEN" "https://registry-1.docker.io/v2/ratelimitpreview/test/manifests/latest" 2>&1

Troubleshooting

Authentication error: “HTTP Basic: Access Denied”

If you receive an HTTP Basic: Access denied error when authenticating against the Dependency Proxy, refer to the two-factor authentication troubleshooting guide.

Dependency Proxy Connection Failure

If a service alias is not set the docker:20.10.16 image is unable to find the dind service, and an error like the following is thrown:

error during connect: Get http://docker:2376/v1.39/info: dial tcp: lookup docker on 192.168.0.1:53: no such host

This can be resolved by setting a service alias for the Docker service:

services:
    - name: ${CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX}/docker:18.09.7-dind
      alias: docker

Issues when authenticating to the Dependency Proxy from CI/CD jobs

GitLab Runner authenticates automatically to the Dependency Proxy. However, the underlying Docker engine is still subject to its authorization resolving process.

Misconfigurations in the authentication mechanism may cause HTTP Basic: Access denied and 403: Access forbidden errors.

You can use the job logs to view the authentication mechanism used to authenticate against the Dependency Proxy:

Authenticating with credentials from $DOCKER_AUTH_CONFIG

Authenticating with credentials from /root/.docker/config.json

Authenticating with credentials from job payload (GitLab Registry)

Make sure you are using the expected authentication mechanism.

Not Found or 404 error when pulling image

Errors like these might indicate that the user running the job doesn’t have a minimum of the Guest role in the Dependency Proxy group:

• ERROR: gitlab.example.com:443/group1/dependency_proxy/containers/alpine:latest: not found
  
  failed to solve with frontend dockerfile.v0: failed to create LLB definition: gitlab.example.com:443/group1/dependency_proxy/containers/alpine:latest: not found
  

• ERROR: Job failed: failed to pull image "gitlab.example.com:443/group1/dependency_proxy/containers/alpine:latest" with specified policies [always]:
  Error response from daemon: error parsing HTTP 404 response body: unexpected end of JSON input: "" (manager.go:237:1s)
  

For more information about the work to improve the error messages in similar cases to Access denied, see issue 354826.

exec format error when running images from the dependency proxy

This error occurs if you try to use the dependency proxy on an ARM-based Docker install in GitLab 16.2 or earlier. The dependency proxy only supports the x86_64 architecture when pulling an image with a specific tag.

As a workaround, you can specify the SHA256 of the image to force the dependency proxy to pull a different architecture:

docker pull ${CI_DEPENDENCY_PROXY_GROUP_IMAGE_PREFIX}/library/docker:20.10.3@sha256:bc9dcf5c8e5908845acc6d34ab8824bca496d6d47d1b08af3baf4b3adb1bd8fe

In this example, bc9dcf5c8e5908845acc6d34ab8824bca496d6d47d1b08af3baf4b3adb1bd8fe is the SHA256 of the ARM based image.